Transport input

Enable telnet and ssh connections:

• transport input telnet ssh

Enable only ssh connections:

• transport input ssh

Switch1#line vty 0 4
Switch1(config-line)# transport input ssh
Switch1(config-line)# login local
Switch1(config-line)# password 7
Switch1(config-line)# exit

transport input ssh

See also

• show ssh, show ip ssh, Cisco IOS/Configure public RSA key authentication, transport input ssh, ip ssh pubkey-chain, crypto key generate rsa, show crypto key mypubkey rsa, crypto key zeroize rsa
• Cisco IOS: Cisco IOS XE, Config (mode), VLANs, Cisco IOS logging, VTP, ACLs, show logging, show logging history, show interface status, debug, archive, show archive, conf t, int, ip http server, ip ssh, ip address, vty, show mac address-table, show access-list, Access-list, ip access-group, admin