Show logging

From wikieduonline
Jump to navigation Jump to search
This article is a Draft. Help us to complete it.

https://www.cisco.com/E-Learning/bulk/public/tac/cim/cib/using_cisco_ios_software/cmdrefs/show_logging.htm

Jan 20 09:58:19.457: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: USERNAME] [Source: 10.10.10.12] [localport: 22] at 09:58:19 UTC Mon Jan 20 2020
2w2d: %SYS-5-CONFIG_I: Configured from console by YOUR_USER on vty0 (10.10.10.10)
Jan 20 07:06:28.820: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/47, changed state to down
Jan 20 07:06:29.824: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/47, changed state to down
Jun 14 07:31:29.792: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/9, changed state to up
Oct 14 10:00:26.381: %LINEPROTO-5-UPDOWN: Line protocol on Interface VlanXXX, changed state to up
Oct  5 10:31:41.348: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet222/0/37 (111), with SW-XXX GigabitEthernet1111/0/24 (80).


Related commands

See also

Advertising: