Difference between revisions of "HBA"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
** <code>[[lspci]] | grep "Fibre Channel"</code> or <code>[[lspci]] -nn | grep "Fibre Channel"</code> | ** <code>[[lspci]] | grep "Fibre Channel"</code> or <code>[[lspci]] -nn | grep "Fibre Channel"</code> | ||
** <code>ls /sys/class/fc_host/</code> | ** <code>ls /sys/class/fc_host/</code> | ||
| − | * [[Fibre Channel]] LUN Scan: | + | * [[Fibre Channel]] LUN Scan or <code>[[rescan-scsi-bus.sh]]</code>: |
**<code>echo "1" > /sys/class/fc_host/host1/issue_lip</code> (No output from command) | **<code>echo "1" > /sys/class/fc_host/host1/issue_lip</code> (No output from command) | ||
**<code>echo "- - -" > /sys/class/scsi_host/host1/scan</code> | **<code>echo "- - -" > /sys/class/scsi_host/host1/scan</code> | ||
Revision as of 13:36, 16 December 2019
HBA is a controller/network card which connects a host system (computer) to other network and storage devices, primarily used with controllers that connect to SCSI, Fibre Channel and eSATA devices
- Identify your HBAs in Linux:
- Fibre Channel LUN Scan or
rescan-scsi-bus.sh:echo "1" > /sys/class/fc_host/host1/issue_lip(No output from command)echo "- - -" > /sys/class/scsi_host/host1/scanlsblk -S
lssdcommand part of HPfibreutilspackage
fc_host
/sys/class/fc_host/host1/port_state[Online]/sys/class/fc_host/host1/fabric_name/sys/class/fc_host/host1/node_name(Used for mapping in your storage array)
See also
- Ethernet:
ifconfig - Fibre Channel: SAN, HBA, LUN, WWN, WWPN, LIF,
rescan-scsi-bus.sh - Block devices:
blkid(UUID),lshw -class disk,hwinfo --disk,udevadm,rescan-scsi-bus.sh,LUN,hdparm,findfs, Add a new disk lsblk,pvscanlspci,lsscsi,smartctl,fdisk,parted,Kpartx,pvdiplay,pvs,udisksctl,/dev/sd, nvme list- SCSI
Advertising:
