Difference between revisions of "Ethtool"

From wikieduonline
Jump to navigation Jump to search
Tags: Mobile web edit, Mobile edit
Tags: Mobile web edit, Mobile edit
Line 3: Line 3:
  
 
== Examples ==
 
== Examples ==
+
 
ethtool eno1
+
* <code>ethtool [[eno]]1</code>
 +
<pre>
 
  Settings for eno1:
 
  Settings for eno1:
Supported ports: [ TP ]
+
Supported ports: [ TP ]
 
Supported link modes:  10baseT/Half 10baseT/Full
 
Supported link modes:  10baseT/Half 10baseT/Full
 
                        100baseT/Half 100baseT/Full
 
                        100baseT/Half 100baseT/Full
Line 36: Line 37:
 
Current message level: 0x000000ff (255)
 
Current message level: 0x000000ff (255)
 
      drv probe link timer ifdown ifup rx_err tx_err
 
      drv probe link timer ifdown ifup rx_err tx_err
 
+
</pre>
  
 
<pre>
 
<pre>

Revision as of 14:02, 18 August 2020

ethtool[1] command is used to view and modify network device drivers setting, in particular wired Ethernet devices.


Examples

 Settings for eno1:
 	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Half 1000baseT/Full
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Half 1000baseT/Full
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full
	                                     100baseT/Half 100baseT/Full
	                                     1000baseT/Full
	Link partner advertised pause frame use: No
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 4
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: off
	Supports Wake-on: g
	Wake-on: g
	Current message level: 0x000000ff (255)
			       drv probe link timer ifdown ifup rx_err tx_err
ethtool ens3f1
Settings for ens3f1:
	Supported ports: [ ]
	Supported link modes:   1000baseT/Full
	                        1000baseKX/Full
	                        10000baseT/Full
	                        1000baseX/Full
	                        10000baseSR/Full
	                        10000baseLR/Full
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseT/Full
	                        1000baseKX/Full
	                        10000baseT/Full
	                        1000baseX/Full
	                        10000baseSR/Full
	                        10000baseLR/Full
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: Unknown!
	Duplex: Unknown! (255)
	Port: Other
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: off
	Supports Wake-on: d
	Wake-on: d
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: no

See also

  • http://man7.org/linux/man-pages/man8/ethtool.8.html
  • Advertising: