| Latest revision |
Your text |
| Line 16: |
Line 16: |
| | | | |
| | smartctl -a /dev/sda | | smartctl -a /dev/sda |
| − |
| |
| − | <pre>
| |
| − | smartctl -a /dev/sdb
| |
| − | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-122-generic] (local build)
| |
| − | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
| |
| − |
| |
| − | === START OF INFORMATION SECTION ===
| |
| − | Device Model: QEMU HARDDISK
| |
| − | Serial Number: QM00003
| |
| − | Firmware Version: 2.5+
| |
| − | User Capacity: 26,843,545,600 bytes [26.8 GB]
| |
| − | Sector Size: 512 bytes logical/physical
| |
| − | Device is: Not in smartctl database [for details use: -P showall]
| |
| − | ATA Version is: ATA/ATAPI-7, ATA/ATAPI-5 published, ANSI NCITS 340-2000
| |
| − | Local Time is: Sun Oct 25 06:00:24 2020 UTC
| |
| − | SMART support is: Available - device has SMART capability.
| |
| − | SMART support is: Enabled
| |
| − |
| |
| − | === START OF READ SMART DATA SECTION ===
| |
| − | SMART overall-health self-assessment test result: PASSED
| |
| − |
| |
| − | General SMART Values:
| |
| − | Offline data collection status: (0x82) Offline data collection activity
| |
| − | was completed without error.
| |
| − | Auto Offline Data Collection: Enabled.
| |
| − | Self-test execution status: ( 0) The previous self-test routine completed
| |
| − | without error or no self-test has ever
| |
| − | been run.
| |
| − | Total time to complete Offline
| |
| − | data collection: ( 288) seconds.
| |
| − | Offline data collection
| |
| − | capabilities: (0x19) SMART execute Offline immediate.
| |
| − | No Auto Offline data collection support.
| |
| − | Suspend Offline collection upon new
| |
| − | command.
| |
| − | Offline surface scan supported.
| |
| − | Self-test supported.
| |
| − | No Conveyance Self-test supported.
| |
| − | No Selective Self-test supported.
| |
| − | SMART capabilities: (0x0003) Saves SMART data before entering
| |
| − | power-saving mode.
| |
| − | Supports SMART auto save timer.
| |
| − | Error logging capability: (0x01) Error logging supported.
| |
| − | No General Purpose Logging support.
| |
| − | Short self-test routine
| |
| − | recommended polling time: ( 2) minutes.
| |
| − | Extended self-test routine
| |
| − | recommended polling time: ( 54) minutes.
| |
| − |
| |
| − | SMART Attributes Data Structure revision number: 1
| |
| − | Vendor Specific SMART Attributes with Thresholds:
| |
| − | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
| |
| − | 1 Raw_Read_Error_Rate 0x0003 100 100 006 Pre-fail Always - 0
| |
| − | 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 16
| |
| − | 4 Start_Stop_Count 0x0002 100 100 020 Old_age Always - 100
| |
| − | 5 Reallocated_Sector_Ct 0x0003 100 100 036 Pre-fail Always - 0
| |
| − | 9 Power_On_Hours 0x0003 100 100 000 Pre-fail Always - 1
| |
| − | 12 Power_Cycle_Count 0x0003 100 100 000 Pre-fail Always - 0
| |
| − | 190 Airflow_Temperature_Cel 0x0003 069 069 050 Pre-fail Always - 31 (Min/Max 31/31)
| |
| − |
| |
| − | SMART Error Log Version: 1
| |
| − | No Errors Logged
| |
| − |
| |
| − | SMART Self-test log structure revision number 1
| |
| − | No self-tests have been logged. [To run self-tests, use: smartctl -t]
| |
| − |
| |
| − | Selective Self-tests/Logging not supported
| |
| − | </pre>
| |
| − |
| |
| − |
| |
| | | | |
| | | | |
