Difference between revisions of "/etc/gitlab/gitlab.rb"

From wikieduonline
Jump to navigation Jump to search
Tag: Replaced
Line 2: Line 2:
 
  cat /etc/gitlab/gitlab.rb | grep -v "#" | grep .
 
  cat /etc/gitlab/gitlab.rb | grep -v "#" | grep .
  
== /etc/gitlab/gitlab.rb ==
+
== [[Full /etc/gitlab/gitlab.rb]] ==
<pre>
 
## GitLab configuration settings
 
##! This file is generated during initial installation and **is not** modified
 
##! during upgrades.
 
##! Check out the latest version of this file to know about the different
 
##! settings that can be configured, when they were introduced and why:
 
##! https://gitlab.com/gitlab-org/omnibus-gitlab/blame/master/files/gitlab-config-template/gitlab.rb.template
 
 
 
##! Locally, the complete template corresponding to the installed version can be found at:
 
##! /opt/gitlab/etc/gitlab.rb.template
 
 
 
##! You can run `gitlab-ctl diff-config` to compare the contents of the current gitlab.rb with
 
##! the gitlab.rb.template from the currently running version.
 
 
 
##! You can run `gitlab-ctl show-config` to display the configuration that will be generated by
 
##! running `gitlab-ctl reconfigure`
 
 
 
##! In general, the values specified here should reflect what the default value of the attribute will be.
 
##! There are instances where this behavior is not possible or desired. For example, when providing passwords,
 
##! or connecting to third party services.
 
##! In those instances, we endeavour to provide an example configuration.
 
 
 
## GitLab URL
 
##! URL on which GitLab will be reachable.
 
##! For more details on configuring external_url see:
 
##! https://docs.gitlab.com/omnibus/settings/configuration.html#configuring-the-external-url-for-gitlab
 
##!
 
##! Note: During installation/upgrades, the value of the environment variable
 
##! EXTERNAL_URL will be used to populate/replace this value.
 
##! On AWS EC2 instances, we also attempt to fetch the public hostname/IP
 
##! address from AWS. For more details, see:
 
##! https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instancedata-data-retrieval.html
 
# external_url 'GENERATED_EXTERNAL_URL'
 
 
 
## Roles for multi-instance GitLab
 
##! The default is to have no roles enabled, which results in GitLab running as an all-in-one instance.
 
##! Options:
 
##!  redis_sentinel_role redis_master_role redis_replica_role geo_primary_role geo_secondary_role
 
##!  postgres_role consul_role application_role monitoring_role
 
##! For more details on each role, see:
 
##! https://docs.gitlab.com/omnibus/roles/README.html#roles
 
##!
 
# roles ['redis_sentinel_role', 'redis_master_role']
 
 
 
## Legend
 
##! The following notations at the beginning of each line may be used to
 
##! differentiate between components of this file and to easily select them using
 
##! a regex.
 
##! ## Titles, subtitles etc
 
##! ##! More information - Description, Docs, Links, Issues etc.
 
##! Configuration settings have a single # followed by a single space at the
 
##! beginning; Remove them to enable the setting.
 
 
 
##! **Configuration settings below are optional.**
 
 
 
 
 
################################################################################
 
################################################################################
 
##                Configuration Settings for GitLab CE and EE                ##
 
################################################################################
 
################################################################################
 
 
 
################################################################################
 
## gitlab.yml configuration
 
##! Docs: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/doc/settings/gitlab.yml.md
 
################################################################################
 
# gitlab_rails['gitlab_ssh_host'] = 'ssh.host_example.com'
 
# gitlab_rails['gitlab_ssh_user'] = ''
 
# gitlab_rails['time_zone'] = 'UTC'
 
 
 
### Request duration
 
###! Tells the rails application how long it has to complete a request
 
###! This value needs to be lower than the worker timeout set in unicorn/puma.
 
###! By default, we'll allow 95% of the the worker timeout
 
# gitlab_rails['max_request_duration_seconds'] = 57
 
 
 
### GitLab email server settings
 
###! Docs: https://docs.gitlab.com/omnibus/settings/smtp.html
 
###! **Use smtp instead of sendmail/postfix.**
 
 
 
# gitlab_rails['smtp_enable'] = true
 
# gitlab_rails['smtp_address'] = "smtp.server"
 
# gitlab_rails['smtp_port'] = 465
 
# gitlab_rails['smtp_user_name'] = "smtp user"
 
# gitlab_rails['smtp_password'] = "smtp password"
 
# gitlab_rails['smtp_domain'] = "example.com"
 
# gitlab_rails['smtp_authentication'] = "login"
 
# gitlab_rails['smtp_enable_starttls_auto'] = true
 
# gitlab_rails['smtp_tls'] = false
 
 
 
###! **Can be: 'none', 'peer', 'client_once', 'fail_if_no_peer_cert'**
 
###! Docs: http://api.rubyonrails.org/classes/ActionMailer/Base.html
 
# gitlab_rails['smtp_openssl_verify_mode'] = 'none'
 
 
 
# gitlab_rails['smtp_ca_path'] = "/etc/ssl/certs"
 
# gitlab_rails['smtp_ca_file'] = "/etc/ssl/certs/ca-certificates.crt"
 
 
 
### Email Settings
 
 
 
# gitlab_rails['gitlab_email_enabled'] = true
 
 
 
##! If your SMTP server does not like the default 'From: [email protected]'
 
##! can change the 'From' with this setting.
 
# gitlab_rails['gitlab_email_from'] = '[email protected]'
 
# gitlab_rails['gitlab_email_display_name'] = 'Example'
 
# gitlab_rails['gitlab_email_reply_to'] = '[email protected]'
 
# gitlab_rails['gitlab_email_subject_suffix'] = ''
 
# gitlab_rails['gitlab_email_smime_enabled'] = false
 
# gitlab_rails['gitlab_email_smime_key_file'] = '/etc/gitlab/ssl/gitlab_smime.key'
 
# gitlab_rails['gitlab_email_smime_cert_file'] = '/etc/gitlab/ssl/gitlab_smime.crt'
 
# gitlab_rails['gitlab_email_smime_ca_certs_file'] = '/etc/gitlab/ssl/gitlab_smime_cas.crt'
 
 
 
### GitLab user privileges
 
# gitlab_rails['gitlab_default_can_create_group'] = true
 
# gitlab_rails['gitlab_username_changing_enabled'] = true
 
 
 
### Default Theme
 
### Available values:
 
##! `1`  for Indigo
 
##! `2`  for Dark
 
##! `3`  for Light
 
##! `4`  for Blue
 
##! `5`  for Green
 
##! `6`  for Light Indigo
 
##! `7`  for Light Blue
 
##! `8`  for Light Green
 
##! `9`  for Red
 
##! `10` for Light Red
 
# gitlab_rails['gitlab_default_theme'] = 2
 
 
 
### Default project feature settings
 
# gitlab_rails['gitlab_default_projects_features_issues'] = true
 
# gitlab_rails['gitlab_default_projects_features_merge_requests'] = true
 
# gitlab_rails['gitlab_default_projects_features_wiki'] = true
 
# gitlab_rails['gitlab_default_projects_features_snippets'] = true
 
# gitlab_rails['gitlab_default_projects_features_builds'] = true
 
# gitlab_rails['gitlab_default_projects_features_container_registry'] = true
 
 
 
### Automatic issue closing
 
###! See https://docs.gitlab.com/ee/customization/issue_closing.html for more
 
###! information about this pattern.
 
# gitlab_rails['gitlab_issue_closing_pattern'] = "\b((?:[Cc]los(?:e[sd]?|ing)|\b[Ff]ix(?:e[sd]|ing)?|\b[Rr]esolv(?:e[sd]?|ing)|\b[Ii]mplement(?:s|ed|ing)?)(:?) +(?:(?:issues? +)?%{issue_ref}(?:(?:, *| +and +)?)|([A-Z][A-Z0-9_]+-\d+))+)"
 
 
 
### Download location
 
###! When a user clicks e.g. 'Download zip' on a project, a temporary zip file
 
###! is created in the following directory.
 
###! Should not be the same path, or a sub directory of any of the `git_data_dirs`
 
# gitlab_rails['gitlab_repository_downloads_path'] = 'tmp/repositories'
 
 
 
### Gravatar Settings
 
# gitlab_rails['gravatar_plain_url'] = 'http://www.gravatar.com/avatar/%{hash}?s=%{size}&d=identicon'
 
# gitlab_rails['gravatar_ssl_url'] = 'https://secure.gravatar.com/avatar/%{hash}?s=%{size}&d=identicon'
 
 
 
### Auxiliary jobs
 
###! Periodically executed jobs, to self-heal Gitlab, do external
 
###! synchronizations, etc.
 
###! Docs: https://github.com/ondrejbartas/sidekiq-cron#adding-cron-job
 
###!      https://docs.gitlab.com/ee/ci/yaml/README.html#artifactsexpire_in
 
# gitlab_rails['stuck_ci_jobs_worker_cron'] = "0 0 * * *"
 
# gitlab_rails['expire_build_artifacts_worker_cron'] = "*/7 * * * *"
 
# gitlab_rails['environments_auto_stop_cron_worker_cron'] = "24 * * * *"
 
# gitlab_rails['pipeline_schedule_worker_cron'] = "19 * * * *"
 
# gitlab_rails['ci_archive_traces_cron_worker_cron'] = "17 * * * *"
 
# gitlab_rails['repository_check_worker_cron'] = "20 * * * *"
 
# gitlab_rails['admin_email_worker_cron'] = "0 0 * * 0"
 
# gitlab_rails['personal_access_tokens_expiring_worker_cron'] = "0 1 * * *"
 
# gitlab_rails['personal_access_tokens_expired_notification_worker_cron'] = "0 2 * * *"
 
# gitlab_rails['repository_archive_cache_worker_cron'] = "0 * * * *"
 
# gitlab_rails['pages_domain_verification_cron_worker'] = "*/15 * * * *"
 
# gitlab_rails['pages_domain_ssl_renewal_cron_worker'] = "*/10 * * * *"
 
# gitlab_rails['pages_domain_removal_cron_worker'] = "47 0 * * *"
 
# gitlab_rails['remove_unaccepted_member_invites_cron_worker'] = "10 15 * * *"
 
# gitlab_rails['schedule_migrate_external_diffs_worker_cron'] = "15 * * * *"
 
# gitlab_rails['ci_platform_metrics_update_cron_worker'] = '47 9 * * *'
 
# gitlab_rails['analytics_usage_trends_count_job_trigger_worker_cron'] = "50 23 */1 * *"
 
# gitlab_rails['member_invitation_reminder_emails_worker_cron'] = "0 0 * * *"
 
# gitlab_rails['user_status_cleanup_batch_worker_cron'] = "* * * * *"
 
 
 
### Webhook Settings
 
###! Number of seconds to wait for HTTP response after sending webhook HTTP POST
 
###! request (default: 10)
 
# gitlab_rails['webhook_timeout'] = 10
 
 
 
### GraphQL Settings
 
###! Tells the rails application how long it has to complete a GraphQL request.
 
###! We suggest this value to be higher than the database timeout value
 
###! and lower than the worker timeout set in unicorn/puma. (default: 30)
 
# gitlab_rails['graphql_timeout'] = 30
 
 
 
### Trusted proxies
 
###! Customize if you have GitLab behind a reverse proxy which is running on a
 
###! different machine.
 
###! **Add the IP address for your reverse proxy to the list, otherwise users
 
###!  will appear signed in from that address.**
 
# gitlab_rails['trusted_proxies'] = []
 
 
 
### Content Security Policy
 
####! Customize if you want to enable the Content-Security-Policy header, which
 
####! can help thwart JavaScript cross-site scripting (XSS) attacks.
 
####! See: https://developer.mozilla.org/en-US/docs/Web/HTTP/CSP
 
# gitlab_rails['content_security_policy'] = {
 
#  'enabled' => false,
 
#  'report_only' => false,
 
#  # Each directive is a String (e.g. "'self'").
 
#  'directives' => {
 
#    'base_uri' => nil,
 
#    'child_src' => nil,
 
#    'connect_src' => nil,
 
#    'default_src' => nil,
 
#    'font_src' => nil,
 
#    'form_action' => nil,
 
#    'frame_ancestors' => nil,
 
#    'frame_src' => nil,
 
#    'img_src' => nil,
 
#    'manifest_src' => nil,
 
#    'media_src' => nil,
 
#    'object_src' => nil,
 
#    'script_src' => nil,
 
#    'style_src' => nil,
 
#    'worker_src' => nil,
 
#    'report_uri' => nil,
 
#  }
 
# }
 
 
 
### Allowed hosts
 
###! Customize the `host` headers that should be catered by the Rails
 
###! application. By default, everything is allowed.
 
# gitlab_rails['allowed_hosts'] = []
 
 
 
### Monitoring settings
 
###! IP whitelist controlling access to monitoring endpoints
 
# gitlab_rails['monitoring_whitelist'] = ['127.0.0.0/8', '::1/128']
 
###! Time between sampling of unicorn socket metrics, in seconds
 
# gitlab_rails['monitoring_unicorn_sampler_interval'] = 10
 
 
 
### Shutdown settings
 
###! Defines an interval to block healthcheck,
 
###! but continue accepting application requests.
 
# gitlab_rails['shutdown_blackout_seconds'] = 10
 
 
 
### Reply by email
 
###! Allow users to comment on issues and merge requests by replying to
 
###! notification emails.
 
###! Docs: https://docs.gitlab.com/ee/administration/reply_by_email.html
 
# gitlab_rails['incoming_email_enabled'] = true
 
 
 
#### Incoming Email Address
 
####! The email address including the `%{key}` placeholder that will be replaced
 
####! to reference the item being replied to.
 
####! **The placeholder can be omitted but if present, it must appear in the
 
####!  "user" part of the address (before the `@`).**
 
# gitlab_rails['incoming_email_address'] = "gitlab-incoming+%{key}@gmail.com"
 
 
 
#### Email account username
 
####! **With third party providers, this is usually the full email address.**
 
####! **With self-hosted email servers, this is usually the user part of the
 
####!  email address.**
 
# gitlab_rails['incoming_email_email'] = "[email protected]"
 
 
 
#### Email account password
 
# gitlab_rails['incoming_email_password'] = "[REDACTED]"
 
 
 
#### IMAP Settings
 
# gitlab_rails['incoming_email_host'] = "imap.gmail.com"
 
# gitlab_rails['incoming_email_port'] = 993
 
# gitlab_rails['incoming_email_ssl'] = true
 
# gitlab_rails['incoming_email_start_tls'] = false
 
 
 
#### Incoming Mailbox Settings (via `mail_room`)
 
####! The mailbox where incoming mail will end up. Usually "inbox".
 
# gitlab_rails['incoming_email_mailbox_name'] = "inbox"
 
####! The IDLE command timeout.
 
# gitlab_rails['incoming_email_idle_timeout'] = 60
 
####! The file name for internal `mail_room` JSON logfile
 
# gitlab_rails['incoming_email_log_file'] = "/var/log/gitlab/mailroom/mail_room_json.log"
 
####! Permanently remove messages from the mailbox when they are deleted after delivery
 
# gitlab_rails['incoming_email_expunge_deleted'] = false
 
 
 
####! The format of mail_room crash logs
 
# mailroom['exit_log_format'] = "plain"
 
 
 
### Consolidated (simplified) object storage configuration
 
###! This uses a single credential for object storage with multiple buckets.
 
###! It also enables Workhorse to upload files directly with its own S3 client
 
###! instead of using pre-signed URLs.
 
###!
 
###! This configuration will only take effect if the object_store
 
###! sections are not defined within the types. For example, enabling
 
###! gitlab_rails['artifacts_object_store_enabled'] or
 
###! gitlab_rails['lfs_object_store_enabled'] will prevent the
 
###! consolidated settings from being used.
 
###!
 
###! Be sure to use different buckets for each type of object.
 
###! Docs: https://docs.gitlab.com/ee/administration/object_storage.html
 
# gitlab_rails['object_store']['enabled'] = false
 
# gitlab_rails['object_store']['connection'] = {}
 
# gitlab_rails['object_store']['storage_options'] = {}
 
# gitlab_rails['object_store']['proxy_download'] = false
 
# gitlab_rails['object_store']['objects']['artifacts']['bucket'] = nil
 
# gitlab_rails['object_store']['objects']['external_diffs']['bucket'] = nil
 
# gitlab_rails['object_store']['objects']['lfs']['bucket'] = nil
 
# gitlab_rails['object_store']['objects']['uploads']['bucket'] = nil
 
# gitlab_rails['object_store']['objects']['packages']['bucket'] = nil
 
# gitlab_rails['object_store']['objects']['dependency_proxy']['bucket'] = nil
 
# gitlab_rails['object_store']['objects']['terraform_state']['bucket'] = nil
 
 
 
### Job Artifacts
 
# gitlab_rails['artifacts_enabled'] = true
 
# gitlab_rails['artifacts_path'] = "/var/opt/gitlab/gitlab-rails/shared/artifacts"
 
####! Job artifacts Object Store
 
####! Docs: https://docs.gitlab.com/ee/administration/job_artifacts.html#using-object-storage
 
# gitlab_rails['artifacts_object_store_enabled'] = false
 
# gitlab_rails['artifacts_object_store_direct_upload'] = false
 
# gitlab_rails['artifacts_object_store_background_upload'] = true
 
# gitlab_rails['artifacts_object_store_proxy_download'] = false
 
# gitlab_rails['artifacts_object_store_remote_directory'] = "artifacts"
 
# gitlab_rails['artifacts_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
### External merge request diffs
 
# gitlab_rails['external_diffs_enabled'] = false
 
# gitlab_rails['external_diffs_when'] = nil
 
# gitlab_rails['external_diffs_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/external-diffs"
 
# gitlab_rails['external_diffs_object_store_enabled'] = false
 
# gitlab_rails['external_diffs_object_store_direct_upload'] = false
 
# gitlab_rails['external_diffs_object_store_background_upload'] = false
 
# gitlab_rails['external_diffs_object_store_proxy_download'] = false
 
# gitlab_rails['external_diffs_object_store_remote_directory'] = "external-diffs"
 
# gitlab_rails['external_diffs_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
### Git LFS
 
# gitlab_rails['lfs_enabled'] = true
 
# gitlab_rails['lfs_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/lfs-objects"
 
# gitlab_rails['lfs_object_store_enabled'] = false
 
# gitlab_rails['lfs_object_store_direct_upload'] = false
 
# gitlab_rails['lfs_object_store_background_upload'] = true
 
# gitlab_rails['lfs_object_store_proxy_download'] = false
 
# gitlab_rails['lfs_object_store_remote_directory'] = "lfs-objects"
 
# gitlab_rails['lfs_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
### GitLab uploads
 
###! Docs: https://docs.gitlab.com/ee/administration/uploads.html
 
# gitlab_rails['uploads_directory'] = "/var/opt/gitlab/gitlab-rails/uploads"
 
# gitlab_rails['uploads_storage_path'] = "/opt/gitlab/embedded/service/gitlab-rails/public"
 
# gitlab_rails['uploads_base_dir'] = "uploads/-/system"
 
# gitlab_rails['uploads_object_store_enabled'] = false
 
# gitlab_rails['uploads_object_store_direct_upload'] = false
 
# gitlab_rails['uploads_object_store_background_upload'] = true
 
# gitlab_rails['uploads_object_store_proxy_download'] = false
 
# gitlab_rails['uploads_object_store_remote_directory'] = "uploads"
 
# gitlab_rails['uploads_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
### Terraform state
 
###! Docs: https://docs.gitlab.com/ee/administration/terraform_state
 
# gitlab_rails['terraform_state_enabled'] = true
 
# gitlab_rails['terraform_state_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/terraform_state"
 
# gitlab_rails['terraform_state_object_store_enabled'] = false
 
# gitlab_rails['terraform_state_object_store_remote_directory'] = "terraform"
 
# gitlab_rails['terraform_state_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
### GitLab Pages
 
# gitlab_rails['pages_object_store_enabled'] = false
 
# gitlab_rails['pages_object_store_remote_directory'] = "pages"
 
# gitlab_rails['pages_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
### Impersonation settings
 
# gitlab_rails['impersonation_enabled'] = true
 
 
 
### Application settings cache expiry in seconds. (default: 60)
 
# gitlab_rails['application_settings_cache_seconds'] = 60
 
 
 
### Usage Statistics
 
# gitlab_rails['usage_ping_enabled'] = true
 
 
 
### Seat Link setting
 
###! Docs: https://docs.gitlab.com/ee/subscriptions/index.html#seat-link
 
# gitlab_rails['seat_link_enabled'] = true
 
 
 
### GitLab Mattermost
 
###! These settings are void if Mattermost is installed on the same omnibus
 
###! install
 
# gitlab_rails['mattermost_host'] = "https://mattermost.example.com"
 
 
 
### LDAP Settings
 
###! Docs: https://docs.gitlab.com/omnibus/settings/ldap.html
 
###! **Be careful not to break the indentation in the ldap_servers block. It is
 
###!  in yaml format and the spaces must be retained. Using tabs will not work.**
 
 
 
# gitlab_rails['ldap_enabled'] = false
 
# gitlab_rails['prevent_ldap_sign_in'] = false
 
 
 
###! **remember to close this block with 'EOS' below**
 
# gitlab_rails['ldap_servers'] = YAML.load <<-'EOS'
 
#  main: # 'main' is the GitLab 'provider ID' of this LDAP server
 
#    label: 'LDAP'
 
#    host: '_your_ldap_server'
 
#    port: 389
 
#    uid: 'sAMAccountName'
 
#    bind_dn: '_the_full_dn_of_the_user_you_will_bind_with'
 
#    password: '_the_password_of_the_bind_user'
 
#    encryption: 'plain' # "start_tls" or "simple_tls" or "plain"
 
#    verify_certificates: true
 
#    smartcard_auth: false
 
#    active_directory: true
 
#    allow_username_or_email_login: false
 
#    lowercase_usernames: false
 
#    block_auto_created_users: false
 
#    base: ''
 
#    user_filter: ''
 
#    ## EE only
 
#    group_base: ''
 
#    admin_group: ''
 
#    sync_ssh_keys: false
 
#
 
#  secondary: # 'secondary' is the GitLab 'provider ID' of second LDAP server
 
#    label: 'LDAP'
 
#    host: '_your_ldap_server'
 
#    port: 389
 
#    uid: 'sAMAccountName'
 
#    bind_dn: '_the_full_dn_of_the_user_you_will_bind_with'
 
#    password: '_the_password_of_the_bind_user'
 
#    encryption: 'plain' # "start_tls" or "simple_tls" or "plain"
 
#    verify_certificates: true
 
#    smartcard_auth: false
 
#    active_directory: true
 
#    allow_username_or_email_login: false
 
#    lowercase_usernames: false
 
#    block_auto_created_users: false
 
#    base: ''
 
#    user_filter: ''
 
#    ## EE only
 
#    group_base: ''
 
#    admin_group: ''
 
#    sync_ssh_keys: false
 
# EOS
 
 
 
### Smartcard authentication settings
 
###! Docs: https://docs.gitlab.com/ee/administration/auth/smartcard.html
 
# gitlab_rails['smartcard_enabled'] = false
 
# gitlab_rails['smartcard_ca_file'] = "/etc/gitlab/ssl/CA.pem"
 
# gitlab_rails['smartcard_client_certificate_required_host'] = 'smartcard.gitlab.example.com'
 
# gitlab_rails['smartcard_client_certificate_required_port'] = 3444
 
# gitlab_rails['smartcard_required_for_git_access'] = false
 
# gitlab_rails['smartcard_san_extensions'] = false
 
 
 
### OmniAuth Settings
 
###! Docs: https://docs.gitlab.com/ee/integration/omniauth.html
 
# gitlab_rails['omniauth_enabled'] = nil
 
# gitlab_rails['omniauth_allow_single_sign_on'] = ['saml']
 
# gitlab_rails['omniauth_sync_email_from_provider'] = 'saml'
 
# gitlab_rails['omniauth_sync_profile_from_provider'] = ['saml']
 
# gitlab_rails['omniauth_sync_profile_attributes'] = ['email']
 
# gitlab_rails['omniauth_auto_sign_in_with_provider'] = 'saml'
 
# gitlab_rails['omniauth_block_auto_created_users'] = true
 
# gitlab_rails['omniauth_auto_link_ldap_user'] = false
 
# gitlab_rails['omniauth_auto_link_saml_user'] = false
 
# gitlab_rails['omniauth_auto_link_user'] = ['saml']
 
# gitlab_rails['omniauth_external_providers'] = ['twitter', 'google_oauth2']
 
# gitlab_rails['omniauth_allow_bypass_two_factor'] = ['google_oauth2']
 
# gitlab_rails['omniauth_providers'] = [
 
#  {
 
#    "name" => "google_oauth2",
 
#    "app_id" => "YOUR APP ID",
 
#    "app_secret" => "YOUR APP SECRET",
 
#    "args" => { "access_type" => "offline", "approval_prompt" => "" }
 
#  }
 
# ]
 
 
 
### FortiAuthenticator authentication settings
 
# gitlab_rails['forti_authenticator_enabled'] = false
 
# gitlab_rails['forti_authenticator_host'] = 'forti_authenticator.example.com'
 
# gitlab_rails['forti_authenticator_port'] = 443
 
# gitlab_rails['forti_authenticator_username'] = 'admin'
 
# gitlab_rails['forti_authenticator_access_token'] = 's3cr3t'
 
 
 
### FortiToken Cloud authentication settings
 
# gitlab_rails['forti_token_cloud_enabled'] = false
 
# gitlab_rails['forti_token_cloud_client_id'] = 'forti_token_cloud_client_id'
 
# gitlab_rails['forti_token_cloud_client_secret'] = 's3cr3t'
 
 
 
### Backup Settings
 
###! Docs: https://docs.gitlab.com/omnibus/settings/backups.html
 
 
 
# gitlab_rails['manage_backup_path'] = true
 
# gitlab_rails['backup_path'] = "/var/opt/gitlab/backups"
 
 
 
###! Docs: https://docs.gitlab.com/ee/raketasks/backup_restore.html#backup-archive-permissions
 
# gitlab_rails['backup_archive_permissions'] = 0644
 
 
 
# gitlab_rails['backup_pg_schema'] = 'public'
 
 
 
###! The duration in seconds to keep backups before they are allowed to be deleted
 
# gitlab_rails['backup_keep_time'] = 604800
 
 
 
# gitlab_rails['backup_upload_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AKIAKIAKI',
 
#  'aws_secret_access_key' => 'secret123',
 
#  # # If IAM profile use is enabled, remove aws_access_key_id and aws_secret_access_key
 
#  'use_iam_profile' => false
 
# }
 
# gitlab_rails['backup_upload_remote_directory'] = 'my.s3.bucket'
 
# gitlab_rails['backup_multipart_chunk_size'] = 104857600
 
 
 
###! **Turns on AWS Server-Side Encryption with Amazon S3-Managed Keys for
 
###!  backups**
 
# gitlab_rails['backup_encryption'] = 'AES256'
 
###! The encryption key to use with AWS Server-Side Encryption.
 
###! Setting this value will enable Server-Side Encryption with customer provided keys;
 
###!  otherwise S3-managed keys are used.
 
# gitlab_rails['backup_encryption_key'] = '<base64-encoded encryption key>'
 
 
 
###! **Specifies Amazon S3 storage class to use for backups. Valid values
 
###!  include 'STANDARD', 'STANDARD_IA', and 'REDUCED_REDUNDANCY'**
 
# gitlab_rails['backup_storage_class'] = 'STANDARD'
 
 
 
###! Skip parts of the backup. Comma separated.
 
###! Docs: https://docs.gitlab.com/ee/raketasks/backup_restore.html#excluding-specific-directories-from-the-backup
 
#gitlab_rails['env'] = {
 
#    "SKIP" => "db,uploads,repositories,builds,artifacts,lfs,registry,pages"
 
#}
 
 
 
### Pseudonymizer Settings
 
# gitlab_rails['pseudonymizer_manifest'] = 'config/pseudonymizer.yml'
 
# gitlab_rails['pseudonymizer_upload_remote_directory'] = 'gitlab-elt'
 
# gitlab_rails['pseudonymizer_upload_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AKIAKIAKI',
 
#  'aws_secret_access_key' => 'secret123'
 
# }
 
 
 
 
 
### For setting up different data storing directory
 
###! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#storing-git-data-in-an-alternative-directory
 
###! **If you want to use a single non-default directory to store git data use a
 
###!  path that doesn't contain symlinks.**
 
# git_data_dirs({
 
#  "default" => {
 
#    "path" => "/mnt/nfs-01/git-data"
 
#    }
 
# })
 
 
 
### Gitaly settings
 
# gitlab_rails['gitaly_token'] = 'secret token'
 
 
 
### For storing GitLab application uploads, eg. LFS objects, build artifacts
 
###! Docs: https://docs.gitlab.com/ee/development/shared_files.html
 
# gitlab_rails['shared_path'] = '/var/opt/gitlab/gitlab-rails/shared'
 
 
 
### For storing encrypted configuration files
 
###! Docs: https://docs.gitlab.com/ee/administration/encrypted_configuration.html
 
# gitlab_rails['encrypted_settings_path'] = '/var/opt/gitlab/gitlab-rails/shared/encrypted_settings'
 
 
 
### Wait for file system to be mounted
 
###! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#only-start-omnibus-gitlab-services-after-a-given-filesystem-is-mounted
 
# high_availability['mountpoint'] = ["/var/opt/gitlab/git-data", "/var/opt/gitlab/gitlab-rails/shared"]
 
 
 
### GitLab Shell settings for GitLab
 
# gitlab_rails['gitlab_shell_ssh_port'] = 22
 
# gitlab_rails['gitlab_shell_git_timeout'] = 800
 
 
 
### Extra customization
 
# gitlab_rails['extra_google_analytics_id'] = '_your_tracking_id'
 
# gitlab_rails['extra_google_tag_manager_id'] = '_your_tracking_id'
 
# gitlab_rails['extra_matomo_url'] = '_your_matomo_url'
 
# gitlab_rails['extra_matomo_site_id'] = '_your_matomo_site_id'
 
# gitlab_rails['extra_matomo_disable_cookies'] = false
 
 
 
##! Docs: https://docs.gitlab.com/omnibus/settings/environment-variables.html
 
# gitlab_rails['env'] = {
 
#  'BUNDLE_GEMFILE' => "/opt/gitlab/embedded/service/gitlab-rails/Gemfile",
 
#  'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin"
 
# }
 
 
 
# gitlab_rails['rack_attack_git_basic_auth'] = {
 
#  'enabled' => false,
 
#  'ip_whitelist' => ["127.0.0.1"],
 
#  'maxretry' => 10,
 
#  'findtime' => 60,
 
#  'bantime' => 3600
 
# }
 
 
 
###! **We do not recommend changing these directories.**
 
# gitlab_rails['dir'] = "/var/opt/gitlab/gitlab-rails"
 
# gitlab_rails['log_directory'] = "/var/log/gitlab/gitlab-rails"
 
 
 
#### Change the initial default admin password and shared runner registration tokens.
 
####! **Only applicable on initial setup, changing these settings after database
 
####!  is created and seeded won't yield any change.**
 
# gitlab_rails['initial_root_password'] = "password"
 
# gitlab_rails['initial_shared_runners_registration_token'] = "token"
 
 
 
#### Set path to an initial license to be used while bootstrapping GitLab.
 
####! **Only applicable on initial setup, future license updations need to be done via UI.
 
####! Updating the file specified in this path won't yield any change after the first reconfigure run.
 
# gitlab_rails['initial_license_file'] = '/etc/gitlab/company.gitlab-license'
 
 
 
#### Enable or disable automatic database migrations
 
# gitlab_rails['auto_migrate'] = true
 
 
 
#### This is advanced feature used by large gitlab deployments where loading
 
#### whole RAILS env takes a lot of time.
 
# gitlab_rails['rake_cache_clear'] = true
 
 
 
### GitLab database settings
 
###! Docs: https://docs.gitlab.com/omnibus/settings/database.html
 
###! **Only needed if you use an external database.**
 
# gitlab_rails['db_adapter'] = "postgresql"
 
# gitlab_rails['db_encoding'] = "unicode"
 
# gitlab_rails['db_collation'] = nil
 
# gitlab_rails['db_database'] = "gitlabhq_production"
 
# gitlab_rails['db_username'] = "gitlab"
 
# gitlab_rails['db_password'] = nil
 
# gitlab_rails['db_host'] = nil
 
# gitlab_rails['db_port'] = 5432
 
# gitlab_rails['db_socket'] = nil
 
# gitlab_rails['db_sslmode'] = nil
 
# gitlab_rails['db_sslcompression'] = 0
 
# gitlab_rails['db_sslrootcert'] = nil
 
# gitlab_rails['db_sslcert'] = nil
 
# gitlab_rails['db_sslkey'] = nil
 
# gitlab_rails['db_prepared_statements'] = false
 
# gitlab_rails['db_statements_limit'] = 1000
 
# gitlab_rails['db_connect_timeout'] = nil
 
# gitlab_rails['db_keepalives'] = nil
 
# gitlab_rails['db_keepalives_idle'] = nil
 
# gitlab_rails['db_keepalives_interval'] = nil
 
# gitlab_rails['db_keepalives_count'] = nil
 
# gitlab_rails['db_tcp_user_timeout'] = nil
 
# gitlab_rails['db_application_name'] = nil
 
 
 
 
 
### GitLab Redis settings
 
###! Connect to your own Redis instance
 
###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html
 
 
 
#### Redis TCP connection
 
# gitlab_rails['redis_host'] = "127.0.0.1"
 
# gitlab_rails['redis_port'] = 6379
 
# gitlab_rails['redis_ssl'] = false
 
# gitlab_rails['redis_password'] = nil
 
# gitlab_rails['redis_database'] = 0
 
# gitlab_rails['redis_enable_client'] = true
 
 
 
#### Redis local UNIX socket (will be disabled if TCP method is used)
 
# gitlab_rails['redis_socket'] = "/var/opt/gitlab/redis/redis.socket"
 
 
 
#### Sentinel support
 
####! To have Sentinel working, you must enable Redis TCP connection support
 
####! above and define a few Sentinel hosts below (to get a reliable setup
 
####! at least 3 hosts).
 
####! **You don't need to list every sentinel host, but the ones not listed will
 
####!  not be used in a fail-over situation to query for the new master.**
 
# gitlab_rails['redis_sentinels'] = [
 
#  {'host' => '127.0.0.1', 'port' => 26379},
 
# ]
 
 
 
#### Separate instances support
 
###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html#running-with-multiple-redis-instances
 
# gitlab_rails['redis_cache_instance'] = nil
 
# gitlab_rails['redis_cache_sentinels'] = nil
 
# gitlab_rails['redis_queues_instance'] = nil
 
# gitlab_rails['redis_queues_sentinels'] = nil
 
# gitlab_rails['redis_shared_state_instance'] = nil
 
# gitlab_rails['redis_shared_sentinels'] = nil
 
# gitlab_rails['redis_actioncable_instance'] = nil
 
# gitlab_rails['redis_actioncable_sentinels'] = nil
 
 
 
################################################################################
 
## Container Registry settings
 
##! Docs: https://docs.gitlab.com/ee/administration/container_registry.html
 
################################################################################
 
 
 
# registry_external_url 'https://registry.example.com'
 
 
 
### Settings used by GitLab application
 
# gitlab_rails['registry_enabled'] = true
 
# gitlab_rails['registry_host'] = "registry.gitlab.example.com"
 
# gitlab_rails['registry_port'] = "5005"
 
# gitlab_rails['registry_path'] = "/var/opt/gitlab/gitlab-rails/shared/registry"
 
 
 
# Notification secret, it's used to authenticate notification requests to GitLab application
 
# You only need to change this when you use external Registry service, otherwise
 
# it will be taken directly from notification settings of your Registry
 
# gitlab_rails['registry_notification_secret'] = nil
 
 
 
###! **Do not change the following 3 settings unless you know what you are
 
###!  doing**
 
# gitlab_rails['registry_api_url'] = "http://localhost:5000"
 
# gitlab_rails['registry_key_path'] = "/var/opt/gitlab/gitlab-rails/certificate.key"
 
# gitlab_rails['registry_issuer'] = "omnibus-gitlab-issuer"
 
 
 
### Settings used by Registry application
 
# registry['enable'] = true
 
# registry['username'] = "registry"
 
# registry['group'] = "registry"
 
# registry['uid'] = nil
 
# registry['gid'] = nil
 
# registry['dir'] = "/var/opt/gitlab/registry"
 
# registry['registry_http_addr'] = "localhost:5000"
 
# registry['debug_addr'] = "localhost:5001"
 
# registry['log_directory'] = "/var/log/gitlab/registry"
 
# registry['env_directory'] = "/opt/gitlab/etc/registry/env"
 
# registry['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
# registry['log_level'] = "info"
 
# registry['log_formatter'] = "text"
 
# registry['rootcertbundle'] = "/var/opt/gitlab/registry/certificate.crt"
 
# registry['health_storagedriver_enabled'] = true
 
# registry['storage_delete_enabled'] = true
 
# registry['validation_enabled'] = false
 
# registry['autoredirect'] = false
 
# registry['compatibility_schema1_enabled'] = false
 
 
 
### Registry backend storage
 
###! Docs: https://docs.gitlab.com/ee/administration/packages/container_registry.html#configure-storage-for-the-container-registry
 
# registry['storage'] = {
 
#  's3' => {
 
#    'accesskey' => 's3-access-key',
 
#    'secretkey' => 's3-secret-key-for-access-key',
 
#    'bucket' => 'your-s3-bucket',
 
#    'region' => 'your-s3-region',
 
#    'regionendpoint' => 'your-s3-regionendpoint'
 
#  },
 
#  'redirect' => {
 
#    'disable' => false
 
#  }
 
# }
 
 
 
### Registry notifications endpoints
 
# registry['notifications'] = [
 
#  {
 
#    'name' => 'test_endpoint',
 
#    'url' => 'https://gitlab.example.com/notify2',
 
#    'timeout' => '500ms',
 
#    'threshold' => 5,
 
#    'backoff' => '1s',
 
#    'headers' => {
 
#      "Authorization" => ["AUTHORIZATION_EXAMPLE_TOKEN"]
 
#    }
 
#  }
 
# ]
 
### Default registry notifications
 
# registry['default_notifications_timeout'] = "500ms"
 
# registry['default_notifications_threshold'] = 5
 
# registry['default_notifications_backoff'] = "1s"
 
# registry['default_notifications_headers'] = {}
 
 
 
################################################################################
 
## Error Reporting and Logging with Sentry
 
################################################################################
 
# gitlab_rails['sentry_enabled'] = false
 
# gitlab_rails['sentry_dsn'] = 'https://<key>@sentry.io/<project>'
 
# gitlab_rails['sentry_clientside_dsn'] = 'https://<key>@sentry.io/<project>'
 
# gitlab_rails['sentry_environment'] = 'production'
 
 
 
################################################################################
 
## CI_JOB_JWT
 
################################################################################
 
##! RSA private key used to sign CI_JOB_JWT
 
# gitlab_rails['ci_jwt_signing_key'] = nil # Will be generated if not set.
 
 
 
################################################################################
 
## GitLab Workhorse
 
##! Docs: https://gitlab.com/gitlab-org/gitlab-workhorse/blob/master/README.md
 
################################################################################
 
 
 
# gitlab_workhorse['enable'] = true
 
# gitlab_workhorse['ha'] = false
 
# gitlab_workhorse['alt_document_root'] = nil
 
# gitlab_workhorse['listen_network'] = "unix"
 
# gitlab_workhorse['listen_umask'] = 000
 
# gitlab_workhorse['listen_addr'] = "/var/opt/gitlab/gitlab-workhorse/sockets/socket"
 
# gitlab_workhorse['auth_backend'] = "http://localhost:8080"
 
 
 
##! the empty string is the default in gitlab-workhorse option parser
 
# gitlab_workhorse['auth_socket'] = "''"
 
 
 
##! put an empty string on the command line
 
# gitlab_workhorse['pprof_listen_addr'] = "''"
 
 
 
# gitlab_workhorse['prometheus_listen_addr'] = "localhost:9229"
 
 
 
# gitlab_workhorse['dir'] = "/var/opt/gitlab/gitlab-workhorse"
 
# gitlab_workhorse['log_directory'] = "/var/log/gitlab/gitlab-workhorse"
 
# gitlab_workhorse['proxy_headers_timeout'] = "1m0s"
 
 
 
##! limit number of concurrent API requests, defaults to 0 which is unlimited
 
# gitlab_workhorse['api_limit'] = 0
 
 
 
##! limit number of API requests allowed to be queued, defaults to 0 which
 
##! disables queuing
 
# gitlab_workhorse['api_queue_limit'] = 0
 
 
 
##! duration after which we timeout requests if they sit too long in the queue
 
# gitlab_workhorse['api_queue_duration'] = "30s"
 
 
 
##! Long polling duration for job requesting for runners
 
# gitlab_workhorse['api_ci_long_polling_duration'] = "60s"
 
 
 
##! Log format: default is json, can also be text or none.
 
# gitlab_workhorse['log_format'] = "json"
 
 
 
# gitlab_workhorse['env_directory'] = "/opt/gitlab/etc/gitlab-workhorse/env"
 
# gitlab_workhorse['env'] = {
 
#  'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin",
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
 
 
##! Resource limitations for the dynamic image scaler.
 
##! Exceeding these thresholds will cause Workhorse to serve images in their original size.
 
##!
 
##! Maximum number of scaler processes that are allowed to execute concurrently.
 
##! It is recommended for this not to exceed the number of CPUs available.
 
# gitlab_workhorse['image_scaler_max_procs'] = 4
 
##!
 
##! Maximum file size in bytes for an image to be considered eligible for rescaling
 
# gitlab_workhorse['image_scaler_max_filesize'] = 250000
 
 
 
################################################################################
 
## GitLab User Settings
 
##! Modify default git user.
 
##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#changing-the-name-of-the-git-user-group
 
################################################################################
 
 
 
# user['username'] = "git"
 
# user['group'] = "git"
 
# user['uid'] = nil
 
# user['gid'] = nil
 
 
 
##! The shell for the git user
 
# user['shell'] = "/bin/sh"
 
 
 
##! The home directory for the git user
 
# user['home'] = "/var/opt/gitlab"
 
 
 
# user['git_user_name'] = "GitLab"
 
# user['git_user_email'] = "gitlab@#{node['fqdn']}"
 
 
 
################################################################################
 
## GitLab Unicorn
 
##! Tweak unicorn settings.
 
##! Docs: https://docs.gitlab.com/omnibus/settings/unicorn.html
 
################################################################################
 
 
 
# unicorn['enable'] = false
 
# unicorn['worker_timeout'] = 60
 
###! Minimum worker_processes is 2 at this moment
 
###! See https://gitlab.com/gitlab-org/gitlab-foss/issues/18771
 
# unicorn['worker_processes'] = 2
 
 
 
### Advanced settings
 
# unicorn['listen'] = 'localhost'
 
# unicorn['port'] = 8080
 
# unicorn['socket'] = '/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket'
 
# unicorn['pidfile'] = '/opt/gitlab/var/unicorn/unicorn.pid'
 
# unicorn['tcp_nopush'] = true
 
# unicorn['backlog_socket'] = 1024
 
 
 
###! **Make sure somaxconn is equal or higher then backlog_socket**
 
# unicorn['somaxconn'] = 1024
 
 
 
###! **We do not recommend changing this setting**
 
# unicorn['log_directory'] = "/var/log/gitlab/unicorn"
 
 
 
### **Only change these settings if you understand well what they mean**
 
###! Docs: https://docs.gitlab.com/ee/administration/operations/unicorn.html#unicorn-worker-killer
 
###!      https://github.com/kzk/unicorn-worker-killer
 
# unicorn['worker_memory_limit_min'] = "1024 * 1 << 20"
 
# unicorn['worker_memory_limit_max'] = "1280 * 1 << 20"
 
 
 
# unicorn['exporter_enabled'] = false
 
# unicorn['exporter_address'] = "127.0.0.1"
 
# unicorn['exporter_port'] = 8083
 
 
 
################################################################################
 
## GitLab Puma
 
##! Tweak puma settings. You should only use Unicorn or Puma, not both.
 
##! Docs: https://docs.gitlab.com/omnibus/settings/puma.html
 
################################################################################
 
 
 
# puma['enable'] = true
 
# puma['ha'] = false
 
# puma['worker_timeout'] = 60
 
# puma['worker_processes'] = 2
 
# puma['min_threads'] = 4
 
# puma['max_threads'] = 4
 
 
 
### Advanced settings
 
# puma['listen'] = '127.0.0.1'
 
# puma['port'] = 8080
 
# puma['socket'] = '/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket'
 
# puma['somaxconn'] = 1024
 
 
 
# puma['pidfile'] = '/opt/gitlab/var/puma/puma.pid'
 
# puma['state_path'] = '/opt/gitlab/var/puma/puma.state'
 
 
 
###! **We do not recommend changing this setting**
 
# puma['log_directory'] = "/var/log/gitlab/puma"
 
 
 
### **Only change these settings if you understand well what they mean**
 
###! Docs: https://github.com/schneems/puma_worker_killer
 
# puma['per_worker_max_memory_mb'] = 850
 
 
 
# puma['exporter_enabled'] = false
 
# puma['exporter_address'] = "127.0.0.1"
 
# puma['exporter_port'] = 8083
 
 
 
################################################################################
 
## GitLab Sidekiq
 
################################################################################
 
 
 
##! GitLab allows one to start multiple sidekiq processes. These
 
##! processes can be used to consume a dedicated set of queues. This
 
##! can be used to ensure certain queues are able to handle additional workload.
 
##! https://docs.gitlab.com/ee/administration/operations/extra_sidekiq_processes.html
 
 
 
# sidekiq['log_directory'] = "/var/log/gitlab/sidekiq"
 
# sidekiq['log_format'] = "json"
 
# sidekiq['shutdown_timeout'] = 4
 
# sidekiq['cluster'] = true
 
# sidekiq['queue_selector'] = false
 
# sidekiq['interval'] = nil
 
# sidekiq['max_concurrency'] = 50
 
# sidekiq['min_concurrency'] = nil
 
 
 
##! Each entry in the queue_groups array denotes a group of queues that have to be processed by a
 
##! Sidekiq process. Multiple queues can be processed by the same process by
 
##! separating them with a comma within the group entry, a `*` will process all queues
 
 
 
# sidekiq['queue_groups'] = ['*']
 
 
 
##! If negate is enabled then sidekiq-cluster will process all the queues that
 
##! don't match those in queue_groups.
 
 
 
# sidekiq['negate'] = false
 
 
 
# sidekiq['metrics_enabled'] = true
 
# sidekiq['exporter_log_enabled'] = false
 
# sidekiq['listen_address'] = "localhost"
 
# sidekiq['listen_port'] = 8082
 
 
 
################################################################################
 
## gitlab-shell
 
################################################################################
 
 
 
# gitlab_shell['audit_usernames'] = false
 
# gitlab_shell['log_level'] = 'INFO'
 
# gitlab_shell['log_format'] = 'json'
 
# gitlab_shell['http_settings'] = { user: 'username', password: 'password', ca_file: '/etc/ssl/cert.pem', ca_path: '/etc/pki/tls/certs', self_signed_cert: false}
 
# gitlab_shell['log_directory'] = "/var/log/gitlab/gitlab-shell/"
 
# gitlab_shell['custom_hooks_dir'] = "/opt/gitlab/embedded/service/gitlab-shell/hooks"
 
 
 
# gitlab_shell['auth_file'] = "/var/opt/gitlab/.ssh/authorized_keys"
 
 
 
### Migration to Go feature flags
 
###! Docs: https://gitlab.com/gitlab-org/gitlab-shell#migration-to-go-feature-flags
 
# gitlab_shell['migration'] = { enabled: true, features: [] }
 
 
 
### Git trace log file.
 
###! If set, git commands receive GIT_TRACE* environment variables
 
###! Docs: https://git-scm.com/book/es/v2/Git-Internals-Environment-Variables#Debugging
 
###! An absolute path starting with / – the trace output will be appended to
 
###! that file. It needs to exist so we can check permissions and avoid
 
###! throwing warnings to the users.
 
# gitlab_shell['git_trace_log_file'] = "/var/log/gitlab/gitlab-shell/gitlab-shell-git-trace.log"
 
 
 
##! **We do not recommend changing this directory.**
 
# gitlab_shell['dir'] = "/var/opt/gitlab/gitlab-shell"
 
 
 
################################################################
 
## GitLab PostgreSQL
 
################################################################
 
 
 
###! Changing any of these settings requires a restart of postgresql.
 
###! By default, reconfigure reloads postgresql if it is running. If you
 
###! change any of these settings, be sure to run `gitlab-ctl restart postgresql`
 
###! after reconfigure in order for the changes to take effect.
 
# postgresql['enable'] = true
 
# postgresql['listen_address'] = nil
 
# postgresql['port'] = 5432
 
 
 
## Only used when Patroni is enabled. This is the port that PostgreSQL responds to other
 
## cluster members. This port is used by Patroni to advertize the PostgreSQL connection
 
## endpoint to the cluster. By default it is the same as postgresql['port'].
 
# postgresql['connect_port'] = 5432
 
 
 
# postgresql['data_dir'] = "/var/opt/gitlab/postgresql/data"
 
 
 
##! **recommend value is 1/4 of total RAM, up to 14GB.**
 
# postgresql['shared_buffers'] = "256MB"
 
 
 
### Advanced settings
 
# postgresql['ha'] = false
 
# postgresql['dir'] = "/var/opt/gitlab/postgresql"
 
# postgresql['log_directory'] = "/var/log/gitlab/postgresql"
 
# postgresql['log_destination'] = nil
 
# postgresql['logging_collector'] = nil
 
# postgresql['log_truncate_on_rotation'] = nil
 
# postgresql['log_rotation_age'] = nil
 
# postgresql['log_rotation_size'] = nil
 
# postgresql['username'] = "gitlab-psql"
 
# postgresql['group'] = "gitlab-psql"
 
##! `SQL_USER_PASSWORD_HASH` can be generated using the command `gitlab-ctl pg-password-md5 gitlab`
 
# postgresql['sql_user_password'] = 'SQL_USER_PASSWORD_HASH'
 
# postgresql['uid'] = nil
 
# postgresql['gid'] = nil
 
# postgresql['shell'] = "/bin/sh"
 
# postgresql['home'] = "/var/opt/gitlab/postgresql"
 
# postgresql['user_path'] = "/opt/gitlab/embedded/bin:/opt/gitlab/bin:$PATH"
 
# postgresql['sql_user'] = "gitlab"
 
# postgresql['max_connections'] = 200
 
# postgresql['md5_auth_cidr_addresses'] = []
 
# postgresql['trust_auth_cidr_addresses'] = []
 
# postgresql['wal_buffers'] = "-1"
 
# postgresql['autovacuum_max_workers'] = "3"
 
# postgresql['autovacuum_freeze_max_age'] = "200000000"
 
# postgresql['log_statement'] = nil
 
# postgresql['track_activity_query_size'] = "1024"
 
# postgresql['shared_preload_libraries'] = nil
 
# postgresql['dynamic_shared_memory_type'] = nil
 
# postgresql['hot_standby'] = "off"
 
 
 
### SSL settings
 
# See https://www.postgresql.org/docs/11/static/runtime-config-connection.html#GUC-SSL-CERT-FILE for more details
 
# postgresql['ssl'] = 'on'
 
# postgresql['hostssl'] = false
 
# postgresql['ssl_ciphers'] = 'HIGH:MEDIUM:+3DES:!aNULL:!SSLv3:!TLSv1'
 
# postgresql['ssl_cert_file'] = 'server.crt'
 
# postgresql['ssl_key_file'] = 'server.key'
 
# postgresql['ssl_ca_file'] = '/opt/gitlab/embedded/ssl/certs/cacert.pem'
 
# postgresql['ssl_crl_file'] = nil
 
# postgresql['cert_auth_addresses'] = {
 
#  'ADDRESS' => {
 
#    database: 'gitlabhq_production',
 
#    user: 'gitlab'
 
#  }
 
# }
 
 
 
### Replication settings
 
###! Note, some replication settings do not require a full restart. They are documented below.
 
# postgresql['wal_level'] = "hot_standby"
 
# postgresql['wal_log_hints'] = 'off'
 
# postgresql['max_wal_senders'] = 5
 
# postgresql['max_replication_slots'] = 0
 
# postgresql['max_locks_per_transaction'] = 128
 
 
 
# Backup/Archive settings
 
# postgresql['archive_mode'] = "off"
 
 
 
###! Changing any of these settings only requires a reload of postgresql. You do not need to
 
###! restart postgresql if you change any of these and run reconfigure.
 
# postgresql['work_mem'] = "16MB"
 
# postgresql['maintenance_work_mem'] = "16MB"
 
# postgresql['checkpoint_segments'] = 10
 
# postgresql['checkpoint_timeout'] = "5min"
 
# postgresql['checkpoint_completion_target'] = 0.9
 
# postgresql['effective_io_concurrency'] = 1
 
# postgresql['checkpoint_warning'] = "30s"
 
# postgresql['effective_cache_size'] = "1MB"
 
# postgresql['shmmax'] =  17179869184 # or 4294967295
 
# postgresql['shmall'] =  4194304 # or 1048575
 
# postgresql['autovacuum'] = "on"
 
# postgresql['log_autovacuum_min_duration'] = "-1"
 
# postgresql['autovacuum_naptime'] = "1min"
 
# postgresql['autovacuum_vacuum_threshold'] = "50"
 
# postgresql['autovacuum_analyze_threshold'] = "50"
 
# postgresql['autovacuum_vacuum_scale_factor'] = "0.02"
 
# postgresql['autovacuum_analyze_scale_factor'] = "0.01"
 
# postgresql['autovacuum_vacuum_cost_delay'] = "20ms"
 
# postgresql['autovacuum_vacuum_cost_limit'] = "-1"
 
# postgresql['statement_timeout'] = "60000"
 
# postgresql['idle_in_transaction_session_timeout'] = "60000"
 
# postgresql['log_line_prefix'] = "%a"
 
# postgresql['max_worker_processes'] = 8
 
# postgresql['max_parallel_workers_per_gather'] = 0
 
# postgresql['log_lock_waits'] = 1
 
# postgresql['deadlock_timeout'] = '5s'
 
# postgresql['track_io_timing'] = 0
 
# postgresql['default_statistics_target'] = 1000
 
 
 
### Available in PostgreSQL 9.6 and later
 
# postgresql['min_wal_size'] = "80MB"
 
# postgresql['max_wal_size'] = "1GB"
 
 
 
# Backup/Archive settings
 
# postgresql['archive_command'] = nil
 
# postgresql['archive_timeout'] = "0"
 
 
 
### Replication settings
 
# postgresql['sql_replication_user'] = "gitlab_replicator"
 
# postgresql['sql_replication_password'] = "md5 hash of postgresql password" # You can generate with `gitlab-ctl pg-password-md5 <dbuser>`
 
# postgresql['wal_keep_segments'] = 10
 
# postgresql['max_standby_archive_delay'] = "30s"
 
# postgresql['max_standby_streaming_delay'] = "30s"
 
# postgresql['synchronous_commit'] = on
 
# postgresql['synchronous_standby_names'] = ''
 
# postgresql['hot_standby_feedback'] = 'off'
 
# postgresql['random_page_cost'] = 2.0
 
# postgresql['log_temp_files'] = -1
 
# postgresql['log_checkpoints'] = 'off'
 
# To add custom entries to pg_hba.conf use the following
 
# postgresql['custom_pg_hba_entries'] = {
 
#  APPLICATION: [ # APPLICATION should identify what the settings are used for
 
#    {
 
#      type: example,
 
#      database: example,
 
#      user: example,
 
#      cidr: example,
 
#      method: example,
 
#      option: example
 
#    }
 
#  ]
 
# }
 
# See https://www.postgresql.org/docs/11/static/auth-pg-hba-conf.html for an explanation
 
# of the values
 
 
 
### Version settings
 
# Set this if you have disabled the bundled PostgreSQL but still want to use the backup rake tasks
 
# postgresql['version'] = 10
 
 
 
################################################################################
 
## GitLab Redis
 
##! **Can be disabled if you are using your own Redis instance.**
 
##! Docs: https://docs.gitlab.com/omnibus/settings/redis.html
 
################################################################################
 
 
 
# redis['enable'] = true
 
# redis['ha'] = false
 
# redis['hz'] = 10
 
# redis['dir'] = "/var/opt/gitlab/redis"
 
# redis['log_directory'] = "/var/log/gitlab/redis"
 
# redis['username'] = "gitlab-redis"
 
# redis['group'] = "gitlab-redis"
 
# redis['maxclients'] = "10000"
 
# redis['maxmemory'] = "0"
 
# redis['maxmemory_policy'] = "noeviction"
 
# redis['maxmemory_samples'] = "5"
 
# redis['tcp_backlog'] = 511
 
# redis['tcp_timeout'] = "60"
 
# redis['tcp_keepalive'] = "300"
 
# redis['uid'] = nil
 
# redis['gid'] = nil
 
 
 
### Disable or obfuscate unnecessary redis command names
 
### Uncomment and edit this block to add or remove entries.
 
### See https://docs.gitlab.com/omnibus/settings/redis.html#renamed-commands
 
### for detailed usage
 
###
 
# redis['rename_commands'] = {
 
#  'KEYS': ''
 
#}
 
#
 
 
 
###! **To enable only Redis service in this machine, uncomment
 
###!  one of the lines below (choose master or replica instance types).**
 
###! Docs: https://docs.gitlab.com/omnibus/settings/redis.html
 
###!      https://docs.gitlab.com/ee/administration/high_availability/redis.html
 
# redis_master_role['enable'] = true
 
# redis_replica_role['enable'] = true
 
 
 
### Redis TCP support (will disable UNIX socket transport)
 
# redis['bind'] = '0.0.0.0' # or specify an IP to bind to a single one
 
# redis['port'] = 6379
 
# redis['password'] = 'redis-password-goes-here'
 
 
 
### Redis Sentinel support
 
###! **You need a master replica Redis replication to be able to do failover**
 
###! **Please read the documentation before enabling it to understand the
 
###!  caveats:**
 
###! Docs: https://docs.gitlab.com/ee/administration/high_availability/redis.html
 
 
 
### Replication support
 
#### Replica Redis instance
 
# redis['master'] = false # by default this is true
 
 
 
#### Replica and Sentinel shared configuration
 
####! **Both need to point to the master Redis instance to get replication and
 
####!  heartbeat monitoring**
 
# redis['master_name'] = 'gitlab-redis'
 
# redis['master_ip'] = nil
 
# redis['master_port'] = 6379
 
 
 
#### Support to run redis replicas in a Docker or NAT environment
 
####! Docs: https://redis.io/topics/replication#configuring-replication-in-docker-and-nat
 
# redis['announce_ip'] = nil
 
# redis['announce_port'] = nil
 
 
 
####! **Master password should have the same value defined in
 
####!  redis['password'] to enable the instance to transition to/from
 
####!  master/replica in a failover event.**
 
# redis['master_password'] = 'redis-password-goes-here'
 
 
 
####! Increase these values when your replicas can't catch up with master
 
# redis['client_output_buffer_limit_normal'] = '0 0 0'
 
# redis['client_output_buffer_limit_replica'] = '256mb 64mb 60'
 
# redis['client_output_buffer_limit_pubsub'] = '32mb 8mb 60'
 
 
 
#####! Redis snapshotting frequency
 
#####! Set to [] to disable
 
#####! Set to [''] to clear previously set values
 
# redis['save'] = [ '900 1', '300 10', '60 10000' ]
 
 
 
#####! Redis lazy freeing
 
#####! Defaults to false
 
# redis['lazyfree_lazy_eviction'] = true
 
# redis['lazyfree_lazy_expire'] = true
 
# redis['lazyfree_lazy_server_del'] = true
 
# redis['replica_lazy_flush'] = true
 
 
 
#####! Redis threaded I/O
 
#####! Defaults to disabled
 
# redis['io_threads'] = 4
 
# redis['io_threads_do_reads'] = true
 
 
 
################################################################################
 
## GitLab Web server
 
##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#using-a-non-bundled-web-server
 
################################################################################
 
 
 
##! When bundled nginx is disabled we need to add the external webserver user to
 
##! the GitLab webserver group.
 
# web_server['external_users'] = []
 
# web_server['username'] = 'gitlab-www'
 
# web_server['group'] = 'gitlab-www'
 
# web_server['uid'] = nil
 
# web_server['gid'] = nil
 
# web_server['shell'] = '/bin/false'
 
# web_server['home'] = '/var/opt/gitlab/nginx'
 
 
 
################################################################################
 
## GitLab NGINX
 
##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html
 
################################################################################
 
 
 
# nginx['enable'] = true
 
# nginx['client_max_body_size'] = '250m'
 
# nginx['redirect_http_to_https'] = false
 
# nginx['redirect_http_to_https_port'] = 80
 
 
 
##! Most root CA's are included by default
 
# nginx['ssl_client_certificate'] = "/etc/gitlab/ssl/ca.crt"
 
 
 
##! enable/disable 2-way SSL client authentication
 
# nginx['ssl_verify_client'] = "off"
 
 
 
##! if ssl_verify_client on, verification depth in the client certificates chain
 
# nginx['ssl_verify_depth'] = "1"
 
 
 
# nginx['ssl_certificate'] = "/etc/gitlab/ssl/#{node['fqdn']}.crt"
 
# nginx['ssl_certificate_key'] = "/etc/gitlab/ssl/#{node['fqdn']}.key"
 
# nginx['ssl_ciphers'] = "ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256"
 
# nginx['ssl_prefer_server_ciphers'] = "on"
 
 
 
##! **Recommended by: https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html
 
##!                  https://cipherli.st/**
 
# nginx['ssl_protocols'] = "TLSv1.2 TLSv1.3"
 
 
 
##! **Recommended in: https://nginx.org/en/docs/http/ngx_http_ssl_module.html**
 
# nginx['ssl_session_cache'] = "builtin:1000  shared:SSL:10m"
 
 
 
##! **Default according to https://nginx.org/en/docs/http/ngx_http_ssl_module.html**
 
# nginx['ssl_session_timeout'] = "5m"
 
 
 
# nginx['ssl_dhparam'] = nil # Path to dhparams.pem, eg. /etc/gitlab/ssl/dhparams.pem
 
# nginx['listen_addresses'] = ['*', '[::]']
 
 
 
##! **Defaults to forcing web browsers to always communicate using only HTTPS**
 
##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#setting-http-strict-transport-security
 
# nginx['hsts_max_age'] = 31536000
 
# nginx['hsts_include_subdomains'] = false
 
 
 
##! Defaults to stripping path information when making cross-origin requests
 
# nginx['referrer_policy'] = 'strict-origin-when-cross-origin'
 
 
 
##! **Docs: http://nginx.org/en/docs/http/ngx_http_gzip_module.html**
 
# nginx['gzip_enabled'] = true
 
 
 
##! **Override only if you use a reverse proxy**
 
##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#setting-the-nginx-listen-port
 
# nginx['listen_port'] = nil
 
 
 
##! **Override only if your reverse proxy internally communicates over HTTP**
 
##! Docs: https://docs.gitlab.com/omnibus/settings/nginx.html#supporting-proxied-ssl
 
# nginx['listen_https'] = nil
 
 
 
# nginx['custom_gitlab_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ {\n deny all;\n}\n"
 
# nginx['custom_nginx_config'] = "include /etc/nginx/conf.d/example.conf;"
 
# nginx['proxy_read_timeout'] = 3600
 
# nginx['proxy_connect_timeout'] = 300
 
# nginx['proxy_set_headers'] = {
 
#  "Host" => "$http_host_with_default",
 
#  "X-Real-IP" => "$remote_addr",
 
#  "X-Forwarded-For" => "$proxy_add_x_forwarded_for",
 
#  "X-Forwarded-Proto" => "https",
 
#  "X-Forwarded-Ssl" => "on",
 
#  "Upgrade" => "$http_upgrade",
 
#  "Connection" => "$connection_upgrade"
 
# }
 
# nginx['proxy_cache_path'] = 'proxy_cache keys_zone=gitlab:10m max_size=1g levels=1:2'
 
# nginx['proxy_cache'] = 'gitlab'
 
# nginx['http2_enabled'] = true
 
# nginx['real_ip_trusted_addresses'] = []
 
# nginx['real_ip_header'] = nil
 
# nginx['real_ip_recursive'] = nil
 
# nginx['custom_error_pages'] = {
 
#  '404' => {
 
#    'title' => 'Example title',
 
#    'header' => 'Example header',
 
#    'message' => 'Example message'
 
#  }
 
# }
 
 
 
### Advanced settings
 
# nginx['dir'] = "/var/opt/gitlab/nginx"
 
# nginx['log_directory'] = "/var/log/gitlab/nginx"
 
# nginx['worker_processes'] = 4
 
# nginx['worker_connections'] = 10240
 
# nginx['log_format'] = '$remote_addr - $remote_user [$time_local] "$request_method $filtered_request_uri $server_protocol" $status $body_bytes_sent "$filtered_http_referer" "$http_user_agent" $gzip_ratio'
 
# nginx['sendfile'] = 'on'
 
# nginx['tcp_nopush'] = 'on'
 
# nginx['tcp_nodelay'] = 'on'
 
# nginx['gzip'] = "on"
 
# nginx['gzip_http_version'] = "1.0"
 
# nginx['gzip_comp_level'] = "2"
 
# nginx['gzip_proxied'] = "any"
 
# nginx['gzip_types'] = [ "text/plain", "text/css", "application/x-javascript", "text/xml", "application/xml", "application/xml+rss", "text/javascript", "application/json" ]
 
# nginx['keepalive_timeout'] = 65
 
# nginx['cache_max_size'] = '5000m'
 
# nginx['server_names_hash_bucket_size'] = 64
 
##! These paths have proxy_request_buffering disabled
 
# nginx['request_buffering_off_path_regex'] = "/api/v\\d/jobs/\\d+/artifacts$|\\.git/git-receive-pack$|\\.git/gitlab-lfs/objects|\\.git/info/lfs/objects/batch$"
 
 
 
### Nginx status
 
# nginx['status'] = {
 
#  "enable" => true,
 
#  "listen_addresses" => ["127.0.0.1"],
 
#  "fqdn" => "dev.example.com",
 
#  "port" => 9999,
 
#  "vts_enable" => true,
 
#  "options" => {
 
#    "server_tokens" => "off", # Don't show the version of NGINX
 
#    "access_log" => "off", # Disable logs for stats
 
#    "allow" => "127.0.0.1", # Only allow access from localhost
 
#    "deny" => "all" # Deny access to anyone else
 
#  }
 
# }
 
 
 
################################################################################
 
## GitLab Logging
 
##! Docs: https://docs.gitlab.com/omnibus/settings/logs.html
 
################################################################################
 
 
 
# logging['svlogd_size'] = 200 * 1024 * 1024 # rotate after 200 MB of log data
 
# logging['svlogd_num'] = 30 # keep 30 rotated log files
 
# logging['svlogd_timeout'] = 24 * 60 * 60 # rotate after 24 hours
 
# logging['svlogd_filter'] = "gzip" # compress logs with gzip
 
# logging['svlogd_udp'] = nil # transmit log messages via UDP
 
# logging['svlogd_prefix'] = nil # custom prefix for log messages
 
# logging['logrotate_frequency'] = "daily" # rotate logs daily
 
# logging['logrotate_maxsize'] = nil # rotate logs when they grow bigger than size bytes even before the specified time interval (daily, weekly, monthly, or yearly)
 
# logging['logrotate_size'] = nil # do not rotate by size by default
 
# logging['logrotate_rotate'] = 30 # keep 30 rotated logs
 
# logging['logrotate_compress'] = "compress" # see 'man logrotate'
 
# logging['logrotate_method'] = "copytruncate" # see 'man logrotate'
 
# logging['logrotate_postrotate'] = nil # no postrotate command by default
 
# logging['logrotate_dateformat'] = nil # use date extensions for rotated files rather than numbers e.g. a value of "-%Y-%m-%d" would give rotated files like production.log-2016-03-09.gz
 
 
 
### UDP log forwarding
 
##! Docs: http://docs.gitlab.com/omnibus/settings/logs.html#udp-log-forwarding
 
 
 
##! remote host to ship log messages to via UDP
 
# logging['udp_log_shipping_host'] = nil
 
 
 
##! override the hostname used when logs are shipped via UDP,
 
##  by default the system hostname will be used.
 
# logging['udp_log_shipping_hostname'] = nil
 
 
 
##! remote port to ship log messages to via UDP
 
# logging['udp_log_shipping_port'] = 514
 
 
 
################################################################################
 
## Logrotate
 
##! Docs: https://docs.gitlab.com/omnibus/settings/logs.html#logrotate
 
##! You can disable built in logrotate feature.
 
################################################################################
 
# logrotate['enable'] = true
 
# logrotate['log_directory'] = "/var/log/gitlab/logrotate"
 
 
 
################################################################################
 
## Users and groups accounts
 
##! Disable management of users and groups accounts.
 
##! **Set only if creating accounts manually**
 
##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#disable-user-and-group-account-management
 
################################################################################
 
 
 
# manage_accounts['enable'] = false
 
 
 
################################################################################
 
## Storage directories
 
##! Disable managing storage directories
 
##! Docs: https://docs.gitlab.com/omnibus/settings/configuration.html#disable-storage-directories-management
 
################################################################################
 
 
 
##! **Set only if the select directories are created manually**
 
# manage_storage_directories['enable'] = false
 
# manage_storage_directories['manage_etc'] = false
 
 
 
################################################################################
 
## Runtime directory
 
##! Docs: https://docs.gitlab.com//omnibus/settings/configuration.html#configuring-runtime-directory
 
################################################################################
 
 
 
# runtime_dir '/run'
 
 
 
################################################################################
 
## Git
 
##! Advanced setting for configuring git system settings for omnibus-gitlab
 
##! internal git
 
################################################################################
 
 
 
##! For multiple options under one header use array of comma separated values,
 
##! eg.:
 
##! { "receive" => ["fsckObjects = true"], "alias" => ["st = status", "co = checkout"] }
 
 
 
# omnibus_gitconfig['system'] = {
 
#  "pack" => ["threads = 1"],
 
#  "receive" => ["fsckObjects = true", "advertisePushOptions = true"],
 
#  "repack" => ["writeBitmaps = true"],
 
#  "transfer" => ["hideRefs=^refs/tmp/", "hideRefs=^refs/keep-around/", "hideRefs=^refs/remotes/"],
 
#  "core" => [
 
#    'alternateRefsCommand="exit 0 #"',
 
#    "fsyncObjectFiles = true"
 
#  ],
 
#  "fetch" => ["writeCommitGraph = true"]
 
# }
 
 
 
################################################################################
 
## GitLab Pages
 
##! Docs: https://docs.gitlab.com/ee/pages/administration.html
 
################################################################################
 
 
 
##! Define to enable GitLab Pages
 
# pages_external_url "http://pages.example.com/"
 
# gitlab_pages['enable'] = false
 
 
 
##! Configure to expose GitLab Pages on external IP address, serving the HTTP
 
# gitlab_pages['external_http'] = []
 
 
 
##! Configure to expose GitLab Pages on external IP address, serving the HTTPS
 
# gitlab_pages['external_https'] = []
 
 
 
##! Configure to expose GitLab Pages on external IP address, serving the HTTPS over PROXYv2
 
# gitlab_pages['external_https_proxyv2'] = []
 
 
 
##! Configure to use the default list of cipher suites
 
# gitlab_pages['insecure_ciphers'] = false
 
 
 
##! Configure to enable health check endpoint on GitLab Pages
 
# gitlab_pages['status_uri'] = "/@status"
 
 
 
##! Tune the maximum number of concurrent connections GitLab Pages will handle.
 
##! Default to 0 for unlimited connections.
 
# gitlab_pages['max_connections'] = 0
 
 
 
##! Setting the propagate_correlation_id to true allows installations behind a reverse proxy
 
##! generate and set a correlation ID to requests sent to GitLab Pages. If a reverse proxy
 
##! sets the header value X-Request-ID, the value will be propagated in the request chain.
 
# gitlab_pages['propagate_correlation_id'] = false
 
 
 
##! Configure to use JSON structured logging in GitLab Pages
 
# gitlab_pages['log_format'] = "json"
 
 
 
##! Configure verbose logging for GitLab Pages
 
# gitlab_pages['log_verbose'] = false
 
 
 
##! Error Reporting and Logging with Sentry
 
# gitlab_pages['sentry_enabled'] = false
 
# gitlab_pages['sentry_dsn'] = 'https://<key>@sentry.io/<project>'
 
# gitlab_pages['sentry_environment'] = 'production'
 
 
 
##! Listen for requests forwarded by reverse proxy
 
# gitlab_pages['listen_proxy'] = "localhost:8090"
 
 
 
# gitlab_pages['redirect_http'] = true
 
# gitlab_pages['use_http2'] = true
 
# gitlab_pages['dir'] = "/var/opt/gitlab/gitlab-pages"
 
# gitlab_pages['log_directory'] = "/var/log/gitlab/gitlab-pages"
 
 
 
# gitlab_pages['artifacts_server'] = true
 
# gitlab_pages['artifacts_server_url'] = nil # Defaults to external_url + '/api/v4'
 
# gitlab_pages['artifacts_server_timeout'] = 10
 
 
 
##! Environments that do not support bind-mounting should set this parameter to
 
##! true. This is incompatible with the artifacts server
 
# gitlab_pages['inplace_chroot'] = false
 
 
 
##! Prometheus metrics for Pages docs: https://gitlab.com/gitlab-org/gitlab-pages/#enable-prometheus-metrics
 
# gitlab_pages['metrics_address'] = ":9235"
 
 
 
##! Specifies the minimum SSL/TLS version ("ssl3", "tls1.0", "tls1.1" or "tls1.2")
 
# gitlab_pages['tls_min_version'] = "ssl3"
 
 
 
##! Specifies the maximum SSL/TLS version ("ssl3", "tls1.0", "tls1.1" or "tls1.2")
 
# gitlab_pages['tls_max_version'] = "tls1.2"
 
 
 
##! Pages access control
 
# gitlab_pages['access_control'] = false
 
# gitlab_pages['gitlab_id'] = nil # Automatically generated if not present
 
# gitlab_pages['gitlab_secret'] = nil # Generated if not present
 
# gitlab_pages['auth_redirect_uri'] = nil # Defaults to projects subdomain of pages_external_url and + '/auth'
 
# gitlab_pages['gitlab_server'] = nil # Defaults to external_url
 
# gitlab_pages['internal_gitlab_server'] = nil # Defaults to gitlab_server, can be changed to internal load balancer
 
# gitlab_pages['auth_secret'] = nil # Generated if not present
 
# gitlab_pages['auth_scope'] = nil # Defaults to api, can be changed to read_api to increase security
 
 
 
##! GitLab API HTTP client connection timeout
 
# gitlab_pages['gitlab_client_http_timeout'] = "10s"
 
 
 
##! GitLab API JWT Token expiry time
 
# gitlab_pages['gitlab_client_jwt_expiry'] = "30s"
 
 
 
##! Domain configuration source, defaults to disk if set to nil
 
# gitlab_pages['domain_config_source'] = nil
 
 
 
##! Advanced settings for API-based configuration for GitLab Pages.
 
##! The recommended default values are set inside GitLab Pages.
 
##! Should be changed only if absolutely needed.
 
 
 
##! The maximum time a domain's configuration is stored in the cache.
 
# gitlab_pages['gitlab_cache_expiry'] = "600s"
 
##! The interval at which a domain's configuration is set to be due to refresh (default: 60s).
 
# gitlab_pages['gitlab_cache_refresh'] = "60s"
 
##! The interval at which expired items are removed from the cache (default: 60s).
 
# gitlab_pages['gitlab_cache_cleanup'] = "60s"
 
##! The maximum time to wait for a response from the GitLab API per request.
 
# gitlab_pages['gitlab_retrieval_timeout'] = "30s"
 
##! The interval to wait before retrying to resolve a domain's configuration via the GitLab API.
 
# gitlab_pages['gitlab_retrieval_interval'] = "1s"
 
##! The maximum number of times to retry to resolve a domain's configuration via the API
 
# gitlab_pages['gitlab_retrieval_retries'] = 3
 
 
 
##! Define custom gitlab-pages HTTP headers for the whole instance
 
# gitlab_pages['headers'] = []
 
 
 
##! Shared secret used for authentication between Pages and GitLab
 
# gitlab_pages['api_secret_key'] = nil # Will be generated if not set. Base64 encoded and exactly 32 bytes long.
 
 
 
##! Advanced settings for serving GitLab Pages from zip archives.
 
##! The recommended default values are set inside GitLab Pages.
 
##! Should be changed only if absolutely needed.
 
 
 
##! The maximum time an archive will be cached in memory.
 
# gitlab_pages['zip_cache_expiration'] = "60s"
 
##! Zip archive cache cleaning interval.
 
# gitlab_pages['zip_cache_cleanup'] = "30s"
 
##! The interval to refresh a cache archive if accessed before expiring.
 
# gitlab_pages['zip_cache_refresh'] = "30s"
 
##! The maximum amount of time it takes to open a zip archive from the file system or object storage.
 
# gitlab_pages['zip_open_timeout'] = "30s"
 
 
 
# gitlab_pages['env_directory'] = "/opt/gitlab/etc/gitlab-pages/env"
 
# gitlab_pages['env'] = {
 
#  'SSL_CERT_DIR' => "#{node['package']['install-dir']}/embedded/ssl/certs/"
 
# }
 
 
 
################################################################################
 
## GitLab Pages NGINX
 
################################################################################
 
 
 
# All the settings defined in the "GitLab Nginx" section are also available in
 
# this "GitLab Pages NGINX" section, using the key `pages_nginx`.  However,
 
# those settings should be explicitly set. That is, settings given as
 
# `nginx['some_setting']` WILL NOT be automatically replicated as
 
# `pages_nginx['some_setting']` and should be set separately.
 
 
 
# Below you can find settings that are exclusive to "GitLab Pages NGINX"
 
# pages_nginx['enable'] = true
 
 
 
# gitlab_rails['pages_path'] = "/var/opt/gitlab/gitlab-rails/shared/pages"
 
 
 
################################################################################
 
## GitLab CI
 
##! Docs: https://docs.gitlab.com/ee/ci/quick_start/README.html
 
################################################################################
 
 
 
# gitlab_ci['gitlab_ci_all_broken_builds'] = true
 
# gitlab_ci['gitlab_ci_add_pusher'] = true
 
# gitlab_ci['builds_directory'] = '/var/opt/gitlab/gitlab-ci/builds'
 
 
 
################################################################################
 
## GitLab Kubernetes Agent Server
 
##! Docs: https://gitlab.com/gitlab-org/cluster-integration/gitlab-agent/blob/master/README.md
 
################################################################################
 
 
 
##! Settings used by the GitLab application
 
# gitlab_rails['gitlab_kas_enabled'] = true
 
# gitlab_rails['gitlab_kas_external_url'] = ws://gitlab.example.com/-/kubernetes-agent
 
# gitlab_rails['gitlab_kas_internal_url'] = grpc://localhost:8153
 
 
 
##! Enable GitLab KAS
 
# gitlab_kas['enable'] = true
 
 
 
##! Agent configuration for GitLab KAS
 
# gitlab_kas['agent_configuration_poll_period'] = 20
 
# gitlab_kas['agent_gitops_poll_period'] = 20
 
# gitlab_kas['agent_gitops_project_info_cache_ttl'] = 300
 
# gitlab_kas['agent_gitops_project_info_cache_error_ttl'] = 60
 
# gitlab_kas['agent_info_cache_ttl'] = 300
 
# gitlab_kas['agent_info_cache_error_ttl'] = 60
 
 
 
##! Shared secret used for authentication between KAS and GitLab
 
# gitlab_kas['api_secret_key'] = nil # Will be generated if not set. Base64 encoded and exactly 32 bytes long.
 
 
 
##! Listen configuration for GitLab KAS
 
# gitlab_kas['listen_address'] = 'localhost:8150'
 
# gitlab_kas['listen_network'] = 'tcp'
 
# gitlab_kas['listen_websocket'] = true
 
# gitlab_kas['internal_api_listen_network'] = 'tcp'
 
# gitlab_kas['internal_api_listen_address'] = 'localhost:8153'
 
 
 
##! Metrics configuration for GitLab KAS
 
# gitlab_kas['metrics_usage_reporting_period'] = 60
 
 
 
##! Directories for GitLab KAS
 
# gitlab_kas['dir'] = '/var/opt/gitlab/gitlab-kas'
 
# gitlab_kas['log_directory'] = '/var/log/gitlab/gitlab-kas'
 
# gitlab_kas['env_directory'] = '/opt/gitlab/etc/gitlab-kas/env'
 
 
 
################################################################################
 
## GitLab Mattermost
 
##! Docs: https://docs.gitlab.com/omnibus/gitlab-mattermost
 
################################################################################
 
 
 
# mattermost_external_url 'http://mattermost.example.com'
 
 
 
# mattermost['enable'] = false
 
# mattermost['username'] = 'mattermost'
 
# mattermost['group'] = 'mattermost'
 
# mattermost['uid'] = nil
 
# mattermost['gid'] = nil
 
# mattermost['home'] = '/var/opt/gitlab/mattermost'
 
# mattermost['database_name'] = 'mattermost_production'
 
# mattermost['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
# mattermost['service_address'] = "127.0.0.1"
 
# mattermost['service_port'] = "8065"
 
# mattermost['service_site_url'] = nil
 
# mattermost['service_allowed_untrusted_internal_connections'] = ""
 
# mattermost['service_enable_api_team_deletion'] = true
 
# mattermost['team_site_name'] = "GitLab Mattermost"
 
# mattermost['sql_driver_name'] = 'mysql'
 
# mattermost['sql_data_source'] = "mmuser:mostest@tcp(dockerhost:3306)/mattermost_test?charset=utf8mb4,utf8"
 
# mattermost['log_file_directory'] = '/var/log/gitlab/mattermost/'
 
# mattermost['gitlab_enable'] = false
 
# mattermost['gitlab_id'] = "12345656"
 
# mattermost['gitlab_secret'] = "123456789"
 
# mattermost['gitlab_scope'] = ""
 
# mattermost['gitlab_auth_endpoint'] = "http://gitlab.example.com/oauth/authorize"
 
# mattermost['gitlab_token_endpoint'] = "http://gitlab.example.com/oauth/token"
 
# mattermost['gitlab_user_api_endpoint'] = "http://gitlab.example.com/api/v4/user"
 
# mattermost['file_directory'] = "/var/opt/gitlab/mattermost/data"
 
# mattermost['plugin_directory'] = "/var/opt/gitlab/mattermost/plugins"
 
# mattermost['plugin_client_directory'] = "/var/opt/gitlab/mattermost/client-plugins"
 
 
 
################################################################################
 
## Mattermost NGINX
 
################################################################################
 
 
 
# All the settings defined in the "GitLab Nginx" section are also available in
 
# this "Mattermost NGINX" section, using the key `mattermost_nginx`.  However,
 
# those settings should be explicitly set. That is, settings given as
 
# `nginx['some_setting']` WILL NOT be automatically replicated as
 
# `mattermost_nginx['some_setting']` and should be set separately.
 
 
 
# Below you can find settings that are exclusive to "Mattermost NGINX"
 
# mattermost_nginx['enable'] = false
 
 
 
# mattermost_nginx['custom_gitlab_mattermost_server_config'] = "location ^~ /foo-namespace/bar-project/raw/ {\n deny all;\n}\n"
 
# mattermost_nginx['proxy_set_headers'] = {
 
#  "Host" => "$http_host",
 
#  "X-Real-IP" => "$remote_addr",
 
#  "X-Forwarded-For" => "$proxy_add_x_forwarded_for",
 
#  "X-Frame-Options" => "SAMEORIGIN",
 
#  "X-Forwarded-Proto" => "https",
 
#  "X-Forwarded-Ssl" => "on",
 
#  "Upgrade" => "$http_upgrade",
 
#  "Connection" => "$connection_upgrade"
 
# }
 
 
 
 
 
################################################################################
 
## Registry NGINX
 
################################################################################
 
 
 
# All the settings defined in the "GitLab Nginx" section are also available in
 
# this "Registry NGINX" section, using the key `registry_nginx`.  However, those
 
# settings should be explicitly set. That is, settings given as
 
# `nginx['some_setting']` WILL NOT be automatically replicated as
 
# `registry_nginx['some_setting']` and should be set separately.
 
 
 
# Below you can find settings that are exclusive to "Registry NGINX"
 
# registry_nginx['enable'] = false
 
 
 
# registry_nginx['proxy_set_headers'] = {
 
#  "Host" => "$http_host",
 
#  "X-Real-IP" => "$remote_addr",
 
#  "X-Forwarded-For" => "$proxy_add_x_forwarded_for",
 
#  "X-Forwarded-Proto" => "https",
 
#  "X-Forwarded-Ssl" => "on"
 
# }
 
 
 
# When the registry is automatically enabled using the same domain as `external_url`,
 
# it listens on this port
 
# registry_nginx['listen_port'] = 5050
 
 
 
################################################################################
 
## Prometheus
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/
 
################################################################################
 
 
 
###! **To enable only Monitoring service in this machine, uncomment
 
###!  the line below.**
 
###! Docs: https://docs.gitlab.com/ee/administration/high_availability
 
# monitoring_role['enable'] = true
 
 
 
# prometheus['enable'] = true
 
# prometheus['monitor_kubernetes'] = true
 
# prometheus['username'] = 'gitlab-prometheus'
 
# prometheus['group'] = 'gitlab-prometheus'
 
# prometheus['uid'] = nil
 
# prometheus['gid'] = nil
 
# prometheus['shell'] = '/bin/sh'
 
# prometheus['home'] = '/var/opt/gitlab/prometheus'
 
# prometheus['log_directory'] = '/var/log/gitlab/prometheus'
 
# prometheus['rules_files'] = ['/var/opt/gitlab/prometheus/rules/*.rules']
 
# prometheus['scrape_interval'] = 15
 
# prometheus['scrape_timeout'] = 15
 
# prometheus['external_labels'] = { }
 
# prometheus['env_directory'] = '/opt/gitlab/etc/prometheus/env'
 
# prometheus['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
#
 
### Custom scrape configs
 
#
 
# Prometheus can scrape additional jobs via scrape_configs.  The default automatically
 
# includes all of the exporters supported by the omnibus config.
 
#
 
# See: https://prometheus.io/docs/operating/configuration/#<scrape_config>
 
#
 
# Example:
 
#
 
# prometheus['scrape_configs'] = [
 
#  {
 
#    'job_name': 'example',
 
#    'static_configs' => [
 
#      'targets' => ['hostname:port'],
 
#    ],
 
#  },
 
# ]
 
#
 
### Custom alertmanager config
 
#
 
# To configure external alertmanagers, create an alertmanager config.
 
#
 
# See: https://prometheus.io/docs/prometheus/latest/configuration/configuration/#alertmanager_config
 
#
 
# prometheus['alertmanagers'] = [
 
#  {
 
#    'static_configs' => [
 
#      {
 
#        'targets' => [
 
#          'hostname:port'
 
#        ]
 
#      }
 
#    ]
 
#  }
 
# ]
 
#
 
### Custom Prometheus flags
 
#
 
# prometheus['flags'] = {
 
#  'storage.tsdb.path' => "/var/opt/gitlab/prometheus/data",
 
#  'storage.tsdb.retention.time' => "15d",
 
#  'config.file' => "/var/opt/gitlab/prometheus/prometheus.yml"
 
# }
 
 
 
##! Advanced settings. Should be changed only if absolutely needed.
 
# prometheus['listen_address'] = 'localhost:9090'
 
#
 
 
 
################################################################################
 
###! **Only needed if Prometheus and Rails are not on the same server.**
 
### For example, in a multi-node architecture, Prometheus will be installed on the monitoring node, while Rails will be on the Rails node.
 
### https://docs.gitlab.com/ee/administration/monitoring/prometheus/index.html#using-an-external-prometheus-server
 
### This value should be the address at which Prometheus is available to GitLab Rails(Puma/Unicorn, Sidekiq) node.
 
################################################################################
 
# gitlab_rails['prometheus_address'] = 'your.prom:9090'
 
 
 
################################################################################
 
## Prometheus Alertmanager
 
################################################################################
 
 
 
# alertmanager['enable'] = true
 
# alertmanager['home'] = '/var/opt/gitlab/alertmanager'
 
# alertmanager['log_directory'] = '/var/log/gitlab/alertmanager'
 
# alertmanager['admin_email'] = '[email protected]'
 
# alertmanager['flags'] = {
 
#  'web.listen-address' => "localhost:9093",
 
#  'storage.path' => "/var/opt/gitlab/alertmanager/data",
 
#  'config.file' => "/var/opt/gitlab/alertmanager/alertmanager.yml"
 
# }
 
# alertmanager['env_directory'] = '/opt/gitlab/etc/alertmanager/env'
 
# alertmanager['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
 
 
##! Advanced settings. Should be changed only if absolutely needed.
 
# alertmanager['listen_address'] = 'localhost:9093'
 
# alertmanager['global'] = {}
 
 
 
################################################################################
 
## Prometheus Node Exporter
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/node_exporter.html
 
################################################################################
 
 
 
# node_exporter['enable'] = true
 
# node_exporter['home'] = '/var/opt/gitlab/node-exporter'
 
# node_exporter['log_directory'] = '/var/log/gitlab/node-exporter'
 
# node_exporter['flags'] = {
 
#  'collector.textfile.directory' => "/var/opt/gitlab/node-exporter/textfile_collector"
 
# }
 
# node_exporter['env_directory'] = '/opt/gitlab/etc/node-exporter/env'
 
# node_exporter['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
 
 
##! Advanced settings. Should be changed only if absolutely needed.
 
# node_exporter['listen_address'] = 'localhost:9100'
 
 
 
################################################################################
 
## Prometheus Redis exporter
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/redis_exporter.html
 
################################################################################
 
 
 
# redis_exporter['enable'] = true
 
# redis_exporter['log_directory'] = '/var/log/gitlab/redis-exporter'
 
# redis_exporter['flags'] = {
 
#  'redis.addr' => "unix:///var/opt/gitlab/redis/redis.socket",
 
# }
 
# redis_exporter['env_directory'] = '/opt/gitlab/etc/redis-exporter/env'
 
# redis_exporter['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
 
 
##! Advanced settings. Should be changed only if absolutely needed.
 
# redis_exporter['listen_address'] = 'localhost:9121'
 
 
 
################################################################################
 
## Prometheus Postgres exporter
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/postgres_exporter.html
 
################################################################################
 
 
 
# postgres_exporter['enable'] = true
 
# postgres_exporter['home'] = '/var/opt/gitlab/postgres-exporter'
 
# postgres_exporter['log_directory'] = '/var/log/gitlab/postgres-exporter'
 
# postgres_exporter['flags'] = {}
 
# postgres_exporter['listen_address'] = 'localhost:9187'
 
# postgres_exporter['env_directory'] = '/opt/gitlab/etc/postgres-exporter/env'
 
# postgres_exporter['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
# postgres_exporter['sslmode'] = nil
 
# postgres_exporter['per_table_stats'] = false
 
 
 
################################################################################
 
## Prometheus PgBouncer exporter (EE only)
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/pgbouncer_exporter.html
 
################################################################################
 
 
 
# pgbouncer_exporter['enable'] = false
 
# pgbouncer_exporter['log_directory'] = "/var/log/gitlab/pgbouncer-exporter"
 
# pgbouncer_exporter['listen_address'] = 'localhost:9188'
 
# pgbouncer_exporter['env_directory'] = '/opt/gitlab/etc/pgbouncer-exporter/env'
 
# pgbouncer_exporter['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
 
 
################################################################################
 
## Prometheus Gitlab exporter
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/gitlab_exporter.html
 
################################################################################
 
 
 
 
 
# gitlab_exporter['enable'] = true
 
# gitlab_exporter['log_directory'] = "/var/log/gitlab/gitlab-exporter"
 
# gitlab_exporter['home'] = "/var/opt/gitlab/gitlab-exporter"
 
 
 
##! Advanced settings. Should be changed only if absolutely needed.
 
# gitlab_exporter['server_name'] = 'webrick'
 
# gitlab_exporter['listen_address'] = 'localhost'
 
# gitlab_exporter['listen_port'] = '9168'
 
 
 
##! Manage gitlab-exporter sidekiq probes. false by default when Sentinels are
 
##! found.
 
# gitlab_exporter['probe_sidekiq'] = true
 
 
 
# To completely disable prometheus, and all of it's exporters, set to false
 
# prometheus_monitoring['enable'] = true
 
 
 
################################################################################
 
## Grafana Dashboards
 
##! Docs: https://docs.gitlab.com/ee/administration/monitoring/prometheus/#prometheus-as-a-grafana-data-source
 
################################################################################
 
 
 
# grafana['enable'] = true
 
# grafana['log_directory'] = '/var/log/gitlab/grafana'
 
# grafana['home'] = '/var/opt/gitlab/grafana'
 
# grafana['admin_password'] = 'admin'
 
# grafana['allow_user_sign_up'] = false
 
# grafana['basic_auth_enabled'] = false
 
# grafana['disable_login_form'] = true
 
# grafana['gitlab_application_id'] = 'GITLAB_APPLICATION_ID'
 
# grafana['gitlab_secret'] = 'GITLAB_SECRET'
 
# grafana['env_directory'] = '/opt/gitlab/etc/grafana/env'
 
# grafana['allowed_groups'] = []
 
# grafana['gitlab_auth_sign_up'] = true
 
# grafana['env'] = {
 
#  'SSL_CERT_DIR' => "#{node['package']['install-dir']}/embedded/ssl/certs/"
 
# }
 
# grafana['metrics_enabled'] = false
 
# grafana['metrics_basic_auth_username'] = 'grafana_metrics' # default: nil
 
# grafana['metrics_basic_auth_password'] = 'please_set_a_unique_password' # default: nil
 
# grafana['alerting_enabled'] = false
 
 
 
### SMTP Configuration
 
#
 
# See: http://docs.grafana.org/administration/configuration/#smtp
 
#
 
# grafana['smtp'] = {
 
#  'enabled' => true,
 
#  'host' => 'localhost:25',
 
#  'user' => nil,
 
#  'password' => nil,
 
#  'cert_file' => nil,
 
#  'key_file' => nil,
 
#  'skip_verify' => false,
 
#  'from_address' => '[email protected]',
 
#  'from_name' => 'Grafana',
 
#  'ehlo_identity' => 'dashboard.example.com',
 
#  'startTLS_policy' => nil
 
# }
 
 
 
# Grafana usage reporting defaults to gitlab_rails['usage_ping_enabled']
 
# grafana['reporting_enabled'] = true
 
 
 
### Dashboards
 
#
 
# See: http://docs.grafana.org/administration/provisioning/#dashboards
 
#
 
# NOTE: Setting this will override the default.
 
#
 
# grafana['dashboards'] = [
 
#  {
 
#    'name' => 'GitLab Omnibus',
 
#    'orgId' => 1,
 
#    'folder' => 'GitLab Omnibus',
 
#    'type' => 'file',
 
#    'disableDeletion' => true,
 
#    'updateIntervalSeconds' => 600,
 
#    'options' => {
 
#      'path' => '/opt/gitlab/embedded/service/grafana-dashboards',
 
#    }
 
#  }
 
# ]
 
 
 
### Datasources
 
#
 
# See: http://docs.grafana.org/administration/provisioning/#example-datasource-config-file
 
#
 
# NOTE: Setting this will override the default.
 
#
 
# grafana['datasources'] = [
 
#  {
 
#    'name' => 'GitLab Omnibus',
 
#    'type' => 'prometheus',
 
#    'access' => 'proxy',
 
#    'url' => 'http://localhost:9090'
 
#  }
 
# ]
 
 
 
##! Advanced settings. Should be changed only if absolutely needed.
 
# grafana['http_addr'] = 'localhost'
 
# grafana['http_port'] = 3000
 
 
 
################################################################################
 
## Gitaly
 
##! Docs:
 
################################################################################
 
 
 
# The gitaly['enable'] option exists for the purpose of cluster
 
# deployments, see https://docs.gitlab.com/ee/administration/gitaly/index.html .
 
# gitaly['enable'] = true
 
# gitaly['dir'] = "/var/opt/gitlab/gitaly"
 
# gitaly['log_directory'] = "/var/log/gitlab/gitaly"
 
# gitaly['bin_path'] = "/opt/gitlab/embedded/bin/gitaly"
 
# gitaly['env_directory'] = "/opt/gitlab/etc/gitaly/env"
 
# gitaly['env'] = {
 
#  'PATH' => "/opt/gitlab/bin:/opt/gitlab/embedded/bin:/bin:/usr/bin",
 
#  'HOME' => '/var/opt/gitlab',
 
#  'TZ' => ':/etc/localtime',
 
#  'PYTHONPATH' => "/opt/gitlab/embedded/lib/python3.7/site-packages",
 
#  'ICU_DATA' => "/opt/gitlab/embedded/share/icu/current",
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/",
 
#  'WRAPPER_JSON_LOGGING' => true
 
# }
 
 
 
##! internal_socket_dir is the directory that will contain internal gitaly sockets,
 
##! separate from socket_path which is the socket that external clients listen on
 
 
 
# gitaly['internal_socket_dir'] = "/var/opt/gitlab/gitaly"
 
# gitaly['socket_path'] = "/var/opt/gitlab/gitaly/gitaly.socket"
 
# gitaly['listen_addr'] = "localhost:8075"
 
# gitaly['tls_listen_addr'] = "localhost:9075"
 
# gitaly['certificate_path'] = "/var/opt/gitlab/gitaly/certificate.pem"
 
# gitaly['key_path'] = "/var/opt/gitlab/gitaly/key.pem"
 
# gitaly['prometheus_listen_addr'] = "localhost:9236"
 
# gitaly['logging_level'] = "warn"
 
# gitaly['logging_format'] = "json"
 
# gitaly['logging_sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>"
 
# gitaly['logging_ruby_sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>"
 
# gitaly['logging_sentry_environment'] = "production"
 
# gitaly['prometheus_grpc_latency_buckets'] = "[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0, 30.0, 60.0, 300.0, 1500.0]"
 
# gitaly['auth_token'] = '<secret>'
 
# gitaly['auth_transitioning'] = false # When true, auth is logged to Prometheus but NOT enforced
 
# gitaly['graceful_restart_timeout'] = '1m' # Grace time for a gitaly process to finish ongoing requests
 
# gitaly['git_catfile_cache_size'] = 100 # Number of 'git cat-file' processes kept around for re-use
 
# gitaly['git_bin_path'] = "/opt/gitlab/embedded/bin/git" # A custom path for the 'git' executable
 
# gitaly['open_files_ulimit'] = 15000 # Maximum number of open files allowed for the gitaly process
 
# gitaly['ruby_max_rss'] = 300000000 # RSS threshold in bytes for triggering a gitaly-ruby restart
 
# gitaly['ruby_graceful_restart_timeout'] = '10m' # Grace time for a gitaly-ruby process to finish ongoing requests
 
# gitaly['ruby_restart_delay'] = '5m' # Period of sustained high RSS that needs to be observed before restarting gitaly-ruby
 
# gitaly['ruby_rugged_git_config_search_path'] = "/opt/gitlab/embedded/etc" # Location of system-wide gitconfig file
 
# gitaly['ruby_num_workers'] = 3 # Number of gitaly-ruby worker processes. Minimum 2, default 2.
 
# gitaly['concurrency'] = [
 
#  {
 
#    'rpc' => "/gitaly.SmartHTTPService/PostReceivePack",
 
#    'max_per_repo' => 20
 
#  }, {
 
#    'rpc' => "/gitaly.SSHService/SSHUploadPack",
 
#    'max_per_repo' => 5
 
#  }
 
# ]
 
#
 
# gitaly['daily_maintenance_start_hour'] = 22
 
# gitaly['daily_maintenance_start_minute'] = 30
 
# gitaly['daily_maintenance_duration'] = '30m'
 
# gitaly['daily_maintenance_storages'] = ["default"]
 
# gitaly['cgroups_count'] = 10
 
# gitaly['cgroups_mountpoint'] = '/sys/fs/cgroup'
 
# gitaly['cgroups_hierarchy_root'] = 'gitaly'
 
# gitaly['cgroups_memory_enabled'] = true
 
# gitaly['cgroups_memory_limit'] = 1048576
 
# gitaly['cgroups_cpu_enabled'] = true
 
# gitaly['cgroups_cpu_shares'] = 512
 
 
 
################################################################################
 
## Praefect
 
##! Docs: https://gitlab.com/gitlab-org/gitaly/blob/master/doc/design_ha.md
 
################################################################################
 
 
 
# praefect['enable'] = false
 
# praefect['dir'] = "/var/opt/gitlab/praefect"
 
# praefect['log_directory'] = "/var/log/gitlab/praefect"
 
# praefect['env_directory'] = "/opt/gitlab/etc/praefect/env"
 
# praefect['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/",
 
#  'GITALY_PID_FILE' => "/var/opt/gitlab/praefect/praefect.pid",
 
#  'WRAPPER_JSON_LOGGING' => true
 
# }
 
# praefect['wrapper_path'] = "/opt/gitlab/embedded/bin/gitaly-wrapper"
 
# praefect['virtual_storage_name'] = "praefect"
 
# praefect['failover_enabled'] = false
 
# praefect['failover_election_strategy'] = 'sql'
 
# praefect['auth_token'] = ""
 
# praefect['auth_transitioning'] = false
 
# praefect['listen_addr'] = "localhost:2305"
 
# praefect['tls_listen_addr'] = "localhost:3305"
 
# praefect['certificate_path'] = "/var/opt/gitlab/prafect/certificate.pem"
 
# praefect['key_path'] = "/var/opt/gitlab/prafect/key.pem"
 
# praefect['prometheus_listen_addr'] = "localhost:9652"
 
# praefect['prometheus_grpc_latency_buckets'] = "[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0, 30.0, 60.0, 300.0, 1500.0]"
 
# praefect['logging_level'] = "warn"
 
# praefect['logging_format'] = "json"
 
# praefect['virtual_storages'] = {
 
#  'default' => {
 
#    'default_replication_factor' => 3,
 
#    'nodes' => {
 
#      'praefect-internal-0' => {
 
#        'address' => 'tcp://10.23.56.78:8075',
 
#        'token' => 'abc123'
 
#      },
 
#      'praefect-internal-1' => {
 
#        'address' => 'tcp://10.76.23.31:8075',
 
#        'token' => 'xyz456'
 
#      }
 
#    }
 
#  },
 
#  'alternative' => {
 
#    'nodes' => {
 
#      'praefect-internal-2' => {
 
#        'address' => 'tcp://10.34.1.16:8075',
 
#        'token' => 'abc321'
 
#      },
 
#      'praefect-internal-3' => {
 
#        'address' => 'tcp://10.23.18.6:8075',
 
#        'token' => 'xyz890'
 
#      }
 
#    }
 
#  }
 
# }
 
# praefect['sentry_dsn'] = "https://<key>:<secret>@sentry.io/<project>"
 
# praefect['sentry_environment'] = "production"
 
# praefect['auto_migrate'] = true
 
# praefect['database_host'] = 'postgres.external'
 
# praefect['database_port'] = 6432
 
# praefect['database_user'] = 'praefect'
 
# praefect['database_password'] = 'secret'
 
# praefect['database_dbname'] = 'praefect_production'
 
# praefect['database_sslmode'] = 'disable'
 
# praefect['database_sslcert'] = '/path/to/client-cert'
 
# praefect['database_sslkey'] = '/path/to/client-key'
 
# praefect['database_sslrootcert'] = '/path/to/rootcert'
 
# praefect['reconciliation_scheduling_interval'] = '5m'
 
# praefect['reconciliation_histogram_buckets'] = '[0.001, 0.005, 0.025, 0.1, 0.5, 1.0, 10.0]'
 
# praefect['database_host_no_proxy'] = 'postgres.internal'
 
# praefect['database_port_no_proxy'] = 5432
 
 
 
################################################################################
 
# Storage check
 
################################################################################
 
# storage_check['enable'] = false
 
# storage_check['target'] = 'unix:///var/opt/gitlab/gitlab-rails/sockets/gitlab.socket'
 
# storage_check['log_directory'] = '/var/log/gitlab/storage-check'
 
 
 
################################################################################
 
# Let's Encrypt integration
 
################################################################################
 
# letsencrypt['enable'] = nil
 
# letsencrypt['contact_emails'] = [] # This should be an array of email addresses to add as contacts
 
# letsencrypt['group'] = 'root'
 
# letsencrypt['key_size'] = 2048
 
# letsencrypt['owner'] = 'root'
 
# letsencrypt['wwwroot'] = '/var/opt/gitlab/nginx/www'
 
# See http://docs.gitlab.com/omnibus/settings/ssl.html#automatic-renewal for more on these sesttings
 
# letsencrypt['auto_renew'] = true
 
# letsencrypt['auto_renew_hour'] = 0
 
# letsencrypt['auto_renew_minute'] = nil # Should be a number or cron expression, if specified.
 
# letsencrypt['auto_renew_day_of_month'] = "*/4"
 
# letsencrypt['auto_renew_log_directory'] = '/var/log/gitlab/lets-encrypt'
 
 
 
##! Turn off automatic init system detection. To skip init detection in
 
##! non-docker containers. Recommended not to change.
 
# package['detect_init'] = true
 
 
 
##! Attempt to modify kernel paramaters. To skip this in containers where the
 
##! relevant file system is read-only, set the value to false.
 
# package['modify_kernel_parameters'] = true
 
 
 
##! Specify maximum number of tasks that can be created by the systemd unit
 
##! Will be populated as TasksMax value to the unit file if user is on a systemd
 
##! version that supports it (>= 227). Will be a no-op if user is not on systemd.
 
# package['systemd_tasks_max'] = 4915
 
 
 
##! Settings to configure order of GitLab's systemd unit.
 
##! Note: We do not recommend changing these values unless absolutely necessary
 
# package['systemd_after'] = 'multi-user.target'
 
# package['systemd_wanted_by'] = 'multi-user.target'
 
################################################################################
 
################################################################################
 
##                  Configuration Settings for GitLab EE only                ##
 
################################################################################
 
################################################################################
 
 
 
 
 
################################################################################
 
## Auxiliary cron jobs applicable to GitLab EE only
 
################################################################################
 
#
 
# gitlab_rails['geo_file_download_dispatch_worker_cron'] = "*/10 * * * *"
 
# gitlab_rails['geo_repository_sync_worker_cron'] = "*/5 * * * *"
 
# gitlab_rails['geo_secondary_registry_consistency_worker'] = "* * * * *"
 
# gitlab_rails['geo_prune_event_log_worker_cron'] = "*/5 * * * *"
 
# gitlab_rails['geo_repository_verification_primary_batch_worker_cron'] = "*/5 * * * *"
 
# gitlab_rails['geo_repository_verification_secondary_scheduler_worker_cron'] = "*/5 * * * *"
 
# gitlab_rails['ldap_sync_worker_cron'] = "30 1 * * *"
 
# gitlab_rails['ldap_group_sync_worker_cron'] = "0 * * * *"
 
# gitlab_rails['historical_data_worker_cron'] = "0 12 * * *"
 
# gitlab_rails['pseudonymizer_worker_cron'] = "0 23 * * *"
 
# gitlab_rails['elastic_index_bulk_cron'] = "*/1 * * * *"
 
# gitlab_rails['analytics_devops_adoption_create_all_snapshots_worker_cron'] = "0 4 * * *"
 
 
 
################################################################################
 
## Kerberos (EE Only)
 
##! Docs: https://docs.gitlab.com/ee/integration/kerberos.html#http-git-access
 
################################################################################
 
 
 
# gitlab_rails['kerberos_enabled'] = true
 
# gitlab_rails['kerberos_keytab'] = /etc/http.keytab
 
# gitlab_rails['kerberos_service_principal_name'] = HTTP/[email protected]
 
# gitlab_rails['kerberos_simple_ldap_linking_allowed_realms'] = ['example.com','kerberos.example.com']
 
# gitlab_rails['kerberos_use_dedicated_port'] = true
 
# gitlab_rails['kerberos_port'] = 8443
 
# gitlab_rails['kerberos_https'] = true
 
 
 
################################################################################
 
## Package repository
 
##! Docs: https://docs.gitlab.com/ee/administration/packages/
 
################################################################################
 
 
 
# gitlab_rails['packages_enabled'] = true
 
# gitlab_rails['packages_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/packages"
 
# gitlab_rails['packages_object_store_enabled'] = false
 
# gitlab_rails['packages_object_store_direct_upload'] = false
 
# gitlab_rails['packages_object_store_background_upload'] = true
 
# gitlab_rails['packages_object_store_proxy_download'] = false
 
# gitlab_rails['packages_object_store_remote_directory'] = "packages"
 
# gitlab_rails['packages_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
################################################################################
 
## Dependency proxy
 
##! Docs: https://docs.gitlab.com/ee/administration/packages/dependency_proxy.html
 
################################################################################
 
 
 
# gitlab_rails['dependency_proxy_enabled'] = true
 
# gitlab_rails['dependency_proxy_storage_path'] = "/var/opt/gitlab/gitlab-rails/shared/dependency_proxy"
 
# gitlab_rails['dependency_proxy_object_store_enabled'] = false
 
# gitlab_rails['dependency_proxy_object_store_direct_upload'] = false
 
# gitlab_rails['dependency_proxy_object_store_background_upload'] = true
 
# gitlab_rails['dependency_proxy_object_store_proxy_download'] = false
 
# gitlab_rails['dependency_proxy_object_store_remote_directory'] = "dependency_proxy"
 
# gitlab_rails['dependency_proxy_object_store_connection'] = {
 
#  'provider' => 'AWS',
 
#  'region' => 'eu-west-1',
 
#  'aws_access_key_id' => 'AWS_ACCESS_KEY_ID',
 
#  'aws_secret_access_key' => 'AWS_SECRET_ACCESS_KEY',
 
#  # # The below options configure an S3 compatible host instead of AWS
 
#  # 'host' => 's3.amazonaws.com',
 
#  # 'aws_signature_version' => 4, # For creation of signed URLs. Set to 2 if provider does not support v4.
 
#  # 'endpoint' => 'https://s3.amazonaws.com', # default: nil - Useful for S3 compliant services such as DigitalOcean Spaces
 
#  # 'path_style' => false # Use 'host/bucket_name/object' instead of 'bucket_name.host/object'
 
# }
 
 
 
################################################################################
 
## GitLab Sentinel (EE Only)
 
##! Docs: http://docs.gitlab.com/ce/administration/high_availability/redis.html#high-availability-with-sentinel
 
################################################################################
 
 
 
##! **Make sure you configured all redis['master_*'] keys above before
 
##!  continuing.**
 
 
 
##! To enable Sentinel and disable all other services in this machine,
 
##! uncomment the line below (if you've enabled Redis role, it will keep it).
 
##! Docs: https://docs.gitlab.com/ee/administration/high_availability/redis.html
 
# redis_sentinel_role['enable'] = true
 
 
 
# sentinel['enable'] = true
 
 
 
##! Bind to all interfaces, uncomment to specify an IP and bind to a single one
 
# sentinel['bind'] = '0.0.0.0'
 
 
 
##! Uncomment to change default port
 
# sentinel['port'] = 26379
 
 
 
#### Support to run sentinels in a Docker or NAT environment
 
#####! Docs: https://redis.io/topics/sentinel#sentinel-docker-nat-and-possible-issues
 
# In an standard case, Sentinel will run in the same network service as Redis, so the same IP will be announce for Redis and Sentinel
 
# Only define these values if it is needed to announce for Sentinel a differen IP service than Redis
 
# sentinel['announce_ip'] = nil # If not defined, its value will be taken from redis['announce_ip'] or nil if not present
 
# sentinel['announce_port'] = nil # If not defined, its value will be taken from sentinel['port'] or nil if redis['announce_ip'] not present
 
 
 
##! Quorum must reflect the amount of voting sentinels it take to start a
 
##! failover.
 
##! **Value must NOT be greater then the amount of sentinels.**
 
##! The quorum can be used to tune Sentinel in two ways:
 
##! 1. If a the quorum is set to a value smaller than the majority of Sentinels
 
##!    we deploy, we are basically making Sentinel more sensible to master
 
##!    failures, triggering a failover as soon as even just a minority of
 
##!    Sentinels is no longer able to talk with the master.
 
##! 2. If a quorum is set to a value greater than the majority of Sentinels, we
 
##!    are making Sentinel able to failover only when there are a very large
 
##!    number (larger than majority) of well connected Sentinels which agree
 
##!    about the master being down.
 
# sentinel['quorum'] = 1
 
 
 
### Consider unresponsive server down after x amount of ms.
 
# sentinel['down_after_milliseconds'] = 10000
 
 
 
### Specifies the failover timeout in milliseconds.
 
##! It is used in many ways:
 
##!
 
##! - The time needed to re-start a failover after a previous failover was
 
##!  already tried against the same master by a given Sentinel, is two
 
##!  times the failover timeout.
 
##!
 
##! - The time needed for a replica replicating to a wrong master according
 
##!  to a Sentinel current configuration, to be forced to replicate
 
##!  with the right master, is exactly the failover timeout (counting since
 
##!  the moment a Sentinel detected the misconfiguration).
 
##!
 
##! - The time needed to cancel a failover that is already in progress but
 
##!  did not produced any configuration change (REPLICAOF NO ONE yet not
 
##!  acknowledged by the promoted replica).
 
##!
 
##! - The maximum time a failover in progress waits for all the replicas to be
 
##!  reconfigured as replicas of the new master. However even after this time
 
##!  the replicas will be reconfigured by the Sentinels anyway, but not with
 
##!  the exact parallel-syncs progression as specified.
 
# sentinel['failover_timeout'] = 60000
 
 
 
################################################################################
 
## Additional Database Settings (EE only)
 
##! Docs: https://docs.gitlab.com/ee/administration/database_load_balancing.html
 
################################################################################
 
# gitlab_rails['db_load_balancing'] = { 'hosts' => ['secondary1.example.com'] }
 
 
 
################################################################################
 
## GitLab Geo
 
##! Docs: https://docs.gitlab.com/ee/gitlab-geo
 
################################################################################
 
##! Geo roles 'geo_primary_role' and 'geo_secondary_role' are set above with
 
##! other roles. For more information, see: https://docs.gitlab.com/omnibus/roles/README.html#roles.
 
 
 
# This is an optional identifier which Geo nodes can use to identify themselves.
 
# For example, if external_url is the same for two secondaries, you must specify
 
# a unique Geo node name for those secondaries.
 
#
 
# If it is blank, it defaults to external_url.
 
# gitlab_rails['geo_node_name'] = nil
 
 
 
# gitlab_rails['geo_registry_replication_enabled'] = true
 
# gitlab_rails['geo_registry_replication_primary_api_url'] = 'https://example.com:5050'
 
 
 
 
 
################################################################################
 
## GitLab Geo Secondary (EE only)
 
################################################################################
 
# geo_secondary['auto_migrate'] = true
 
# geo_secondary['db_adapter'] = "postgresql"
 
# geo_secondary['db_encoding'] = "unicode"
 
# geo_secondary['db_collation'] = nil
 
# geo_secondary['db_database'] = "gitlabhq_geo_production"
 
# geo_secondary['db_username'] = "gitlab_geo"
 
# geo_secondary['db_password'] = nil
 
# geo_secondary['db_host'] = "/var/opt/gitlab/geo-postgresql"
 
# geo_secondary['db_port'] = 5431
 
# geo_secondary['db_socket'] = nil
 
# geo_secondary['db_sslmode'] = nil
 
# geo_secondary['db_sslcompression'] = 0
 
# geo_secondary['db_sslrootcert'] = nil
 
# geo_secondary['db_sslca'] = nil
 
 
 
################################################################################
 
## GitLab Geo Secondary Tracking Database (EE only)
 
################################################################################
 
 
 
# geo_postgresql['enable'] = false
 
# geo_postgresql['ha'] = false
 
# geo_postgresql['dir'] = '/var/opt/gitlab/geo-postgresql'
 
# geo_postgresql['data_dir'] = '/var/opt/gitlab/geo-postgresql/data'
 
# geo_postgresql['pgbouncer_user'] = nil
 
# geo_postgresql['pgbouncer_user_password'] = nil
 
##! `SQL_USER_PASSWORD_HASH` can be generated using the command `gitlab-ctl pg-password-md5 gitlab`
 
# geo_postgresql['sql_user_password'] = 'SQL_USER_PASSWORD_HASH'
 
 
 
################################################################################
 
## Unleash
 
##! These settings are for GitLab internal use.
 
##! They are used to control feature flags during GitLab development.
 
##! Docs: https://docs.gitlab.com/ee/development/feature_flags
 
################################################################################
 
# gitlab_rails['feature_flags_unleash_enabled'] = false
 
# gitlab_rails['feature_flags_unleash_url'] = nil
 
# gitlab_rails['feature_flags_unleash_app_name'] = nil
 
# gitlab_rails['feature_flags_unleash_instance_id'] = nil
 
 
 
################################################################################
 
# Pgbouncer (EE only)
 
# See [GitLab PgBouncer documentation](http://docs.gitlab.com/omnibus/settings/database.html#enabling-pgbouncer-ee-only)
 
# See the [PgBouncer page](https://pgbouncer.github.io/config.html) for details
 
################################################################################
 
# pgbouncer['enable'] = false
 
# pgbouncer['log_directory'] = '/var/log/gitlab/pgbouncer'
 
# pgbouncer['data_directory'] = '/var/opt/gitlab/pgbouncer'
 
# pgbouncer['env_directory'] = '/opt/gitlab/etc/pgbouncer/env'
 
# pgbouncer['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
# pgbouncer['listen_addr'] = '0.0.0.0'
 
# pgbouncer['listen_port'] = '6432'
 
# pgbouncer['pool_mode'] = 'transaction'
 
# pgbouncer['server_reset_query'] = 'DISCARD ALL'
 
# pgbouncer['application_name_add_host'] = '1'
 
# pgbouncer['max_client_conn'] = '2048'
 
# pgbouncer['default_pool_size'] = '100'
 
# pgbouncer['min_pool_size'] = '0'
 
# pgbouncer['reserve_pool_size'] = '5'
 
# pgbouncer['reserve_pool_timeout'] = '5.0'
 
# pgbouncer['server_round_robin'] = '0'
 
# pgbouncer['log_connections'] = '0'
 
# pgbouncer['server_idle_timeout'] = '30'
 
# pgbouncer['dns_max_ttl'] = '15.0'
 
# pgbouncer['dns_zone_check_period'] = '0'
 
# pgbouncer['dns_nxdomain_ttl'] = '15.0'
 
# pgbouncer['admin_users'] = %w(gitlab-psql postgres pgbouncer)
 
# pgbouncer['stats_users'] = %w(gitlab-psql postgres pgbouncer)
 
# pgbouncer['ignore_startup_parameters'] = 'extra_float_digits'
 
# pgbouncer['databases'] = {
 
#  DATABASE_NAME: {
 
#    host: HOSTNAME,
 
#    port: PORT
 
#    user: USERNAME,
 
#    password: PASSWORD
 
###! generate this with `echo -n '$password + $username' | md5sum`
 
#  }
 
#  ...
 
# }
 
# pgbouncer['logfile'] = nil
 
# pgbouncer['unix_socket_dir'] = nil
 
# pgbouncer['unix_socket_mode'] = '0777'
 
# pgbouncer['unix_socket_group'] = nil
 
# pgbouncer['auth_type'] = 'md5'
 
# pgbouncer['auth_hba_file'] = nil
 
# pgbouncer['auth_query'] = 'SELECT username, password FROM public.pg_shadow_lookup($1)'
 
# pgbouncer['users'] = {
 
#  {
 
#    name: USERNAME,
 
#    password: MD5_PASSWORD_HASH
 
#  }
 
# }
 
# postgresql['pgbouncer_user'] = nil
 
# postgresql['pgbouncer_user_password'] = nil
 
# pgbouncer['server_reset_query_always'] = 0
 
# pgbouncer['server_check_query'] = 'select 1'
 
# pgbouncer['server_check_delay'] = 30
 
# pgbouncer['max_db_connections'] = nil
 
# pgbouncer['max_user_connections'] = nil
 
# pgbouncer['syslog'] = 0
 
# pgbouncer['syslog_facility'] = 'daemon'
 
# pgbouncer['syslog_ident'] = 'pgbouncer'
 
# pgbouncer['log_disconnections'] = 1
 
# pgbouncer['log_pooler_errors'] = 1
 
# pgbouncer['stats_period'] = 60
 
# pgbouncer['verbose'] = 0
 
# pgbouncer['server_lifetime'] = 3600
 
# pgbouncer['server_connect_timeout'] = 15
 
# pgbouncer['server_login_retry'] = 15
 
# pgbouncer['query_timeout'] = 0
 
# pgbouncer['query_wait_timeout'] = 120
 
# pgbouncer['client_idle_timeout'] = 0
 
# pgbouncer['client_login_timeout'] = 60
 
# pgbouncer['autodb_idle_timeout'] = 3600
 
# pgbouncer['suspend_timeout'] = 10
 
# pgbouncer['idle_transaction_timeout'] = 0
 
# pgbouncer['pkt_buf'] = 4096
 
# pgbouncer['listen_backlog'] = 128
 
# pgbouncer['sbuf_loopcnt'] = 5
 
# pgbouncer['max_packet_size'] = 2147483647
 
# pgbouncer['tcp_defer_accept'] = 0
 
# pgbouncer['tcp_socket_buffer'] = 0
 
# pgbouncer['tcp_keepalive'] = 1
 
# pgbouncer['tcp_keepcnt'] = 0
 
# pgbouncer['tcp_keepidle'] = 0
 
# pgbouncer['tcp_keepintvl'] = 0
 
# pgbouncer['disable_pqexec'] = 0
 
 
 
## Pgbouncer client TLS options
 
# pgbouncer['client_tls_sslmode'] = 'disable'
 
# pgbouncer['client_tls_ca_file'] = nil
 
# pgbouncer['client_tls_key_file'] = nil
 
# pgbouncer['client_tls_cert_file'] = nil
 
# pgbouncer['client_tls_protocols'] = 'all'
 
# pgbouncer['client_tls_dheparams'] = 'auto'
 
# pgbouncer['client_tls_ecdhcurve'] = 'auto'
 
#
 
## Pgbouncer server  TLS options
 
# pgbouncer['server_tls_sslmode'] = 'disable'
 
# pgbouncer['server_tls_ca_file'] = nil
 
# pgbouncer['server_tls_key_file'] = nil
 
# pgbouncer['server_tls_cert_file'] = nil
 
# pgbouncer['server_tls_protocols'] = 'all'
 
# pgbouncer['server_tls_ciphers'] = 'fast'
 
 
 
################################################################################
 
# Repmgr (EE only)
 
################################################################################
 
# repmgr['enable'] = false
 
# repmgr['cluster'] = 'gitlab_cluster'
 
# repmgr['database'] = 'gitlab_repmgr'
 
# repmgr['host'] = nil
 
# repmgr['node_number'] = nil
 
# repmgr['port'] = 5432
 
# repmgr['trust_auth_cidr_addresses'] = []
 
# repmgr['username'] = 'gitlab_repmgr'
 
# repmgr['sslmode'] = 'prefer'
 
# repmgr['sslcompression'] = 0
 
# repmgr['failover'] = 'automatic'
 
# repmgr['log_directory'] = '/var/log/gitlab/repmgrd'
 
# repmgr['node_name'] = nil
 
# repmgr['pg_bindir'] = '/opt/gitlab/embedded/bin'
 
# repmgr['service_start_command'] = '/opt/gitlab/bin/gitlab-ctl start postgresql'
 
# repmgr['service_stop_command'] = '/opt/gitlab/bin/gitlab-ctl stop postgresql'
 
# repmgr['service_reload_command'] = '/opt/gitlab/bin/gitlab-ctl hup postgresql'
 
# repmgr['service_restart_command'] = '/opt/gitlab/bin/gitlab-ctl restart postgresql'
 
# repmgr['service_promote_command'] = nil
 
# repmgr['promote_command'] = '/opt/gitlab/embedded/bin/repmgr standby promote -f /var/opt/gitlab/postgresql/repmgr.conf'
 
# repmgr['follow_command'] = '/opt/gitlab/embedded/bin/repmgr standby follow -f /var/opt/gitlab/postgresql/repmgr.conf'
 
 
 
# repmgr['upstream_node'] = nil
 
# repmgr['use_replication_slots'] = false
 
# repmgr['loglevel'] = 'INFO'
 
# repmgr['logfacility'] = 'STDERR'
 
# repmgr['logfile'] = nil
 
 
 
# repmgr['event_notification_command'] = nil
 
# repmgr['event_notifications'] = nil
 
 
 
# repmgr['rsync_options'] = nil
 
# repmgr['ssh_options'] = nil
 
# repmgr['priority'] = nil
 
#
 
# HA setting to specify if a node should attempt to be master on initialization
 
# repmgr['master_on_initialization'] = true
 
 
 
# repmgr['retry_promote_interval_secs'] = 300
 
# repmgr['witness_repl_nodes_sync_interval_secs'] = 15
 
# repmgr['reconnect_attempts'] = 6
 
# repmgr['reconnect_interval'] = 10
 
# repmgr['monitor_interval_secs'] = 2
 
# repmgr['master_response_timeout'] = 60
 
# repmgr['daemon'] = true
 
# repmgrd['enable'] = true
 
 
 
################################################################################
 
# Patroni (EE only)
 
#
 
# NOTICE: Patroni is an experimental feature and subject to change.
 
#
 
################################################################################
 
# patroni['enable'] = false
 
 
 
# patroni['dir'] = '/var/opt/gitlab/patroni'
 
# patroni['data_dir'] = '/var/opt/gitlab/patroni/data'
 
# patroni['ctl_command'] = '/opt/gitlab/embedded/bin/patronictl'
 
 
 
## Patroni dynamic configuration settings
 
# patroni['loop_wait'] = 10
 
# patroni['ttl'] = 30
 
# patroni['retry_timeout'] = 10
 
# patroni['maximum_lag_on_failover'] = 1_048_576
 
# patroni['max_timelines_history'] = 0
 
# patroni['master_start_timeout'] = 300
 
# patroni['use_pg_rewind'] = true
 
# patroni['remove_data_directory_on_rewind_failure'] = false
 
# patroni['remove_data_directory_on_diverged_timelines'] = false
 
# patroni['use_slots'] = true
 
# patroni['replication_password'] = nil
 
# patroni['replication_slots'] = {}
 
 
 
## Standby cluster replication settings
 
# patroni['standby_cluster']['enable'] = false
 
# patroni['standby_cluster']['host'] = nil
 
# patroni['standby_cluster']['port'] = 5432
 
# patroni['standby_cluster']['primary_slot_name'] = nil
 
 
 
## Global/Universal settings
 
# patroni['scope'] = 'gitlab-postgresql-ha'
 
# patroni['name'] = nil
 
 
 
## Log settings
 
# patroni['log_directory'] = '/var/log/gitlab/patroni'
 
# patroni['log_level'] = 'INFO'
 
 
 
## Consul specific settings
 
# patroni['consul']['url'] = 'http://127.0.0.1:8500'
 
# patroni['consul']['service_check_interval'] = '10s'
 
# patroni['consul']['register_service'] = true
 
# patroni['consul']['checks'] = []
 
 
 
## PostgreSQL configuration override
 
# patroni['postgresql']['hot_standby'] = 'on'
 
 
 
## The following must hold the same values on all nodes.
 
## Leave unassined to use PostgreSQL's default values.
 
# patroni['postgresql']['wal_level'] = 'replica'
 
# patroni['postgresql']['wal_log_hints'] = 'on'
 
# patroni['postgresql']['max_worker_processes'] = 8
 
# patroni['postgresql']['max_locks_per_transaction'] = 64
 
# patroni['postgresql']['max_connections'] = 200
 
# patroni['postgresql']['checkpoint_timeout'] = 30
 
 
 
## The following can hold different values on all nodes.
 
## Leave unassined to use PostgreSQL's default values.
 
# patroni['postgresql']['wal_keep_segments'] = 8
 
# patroni['postgresql']['max_wal_senders'] = 5
 
# patroni['postgresql']['max_replication_slots'] = 5
 
 
 
## Permanent replication slots for Streaming Replication
 
# patroni['replication_slots'] = {
 
#  'geo_secondary' => { 'type' => 'physical' }
 
# }
 
 
 
## The address and port that Patroni API binds to and listens on.
 
# patroni['listen_address'] = nil
 
# patroni['port'] = '8008'
 
 
 
## The address of the Patroni node that is advertized to other cluster
 
## members to communicate with its API and PostgreSQL. If it is not specified,
 
## it tries to use the first available private IP and falls back to the default
 
## network interface.
 
# patroni['connect_address'] = nil
 
 
 
## The port that Patroni API responds to other cluster members. This port is
 
## advertized and by default is the same as patroni['port'].
 
# patroni['connect_port'] = '8008'
 
 
 
 
 
################################################################################
 
# Consul (EEP only)
 
################################################################################
 
# consul['enable'] = false
 
# consul['dir'] = '/var/opt/gitlab/consul'
 
# consul['username'] = 'gitlab-consul'
 
# consul['group'] = 'gitlab-consul'
 
# consul['config_file'] = '/var/opt/gitlab/consul/config.json'
 
# consul['config_dir'] = '/var/opt/gitlab/consul/config.d'
 
# consul['data_dir'] = '/var/opt/gitlab/consul/data'
 
# consul['log_directory'] = '/var/log/gitlab/consul'
 
# consul['env_directory'] = '/opt/gitlab/etc/consul/env'
 
# consul['env'] = {
 
#  'SSL_CERT_DIR' => "/opt/gitlab/embedded/ssl/certs/"
 
# }
 
# consul['monitoring_service_discovery'] = false
 
# consul['node_name'] = nil
 
# consul['script_directory'] = '/var/opt/gitlab/consul/scripts'
 
# consul['configuration'] = {
 
#  'client_addr' => nil,
 
#  'datacenter' => 'gitlab_consul',
 
#  'enable_script_checks' => true,
 
#  'server' => false
 
# }
 
# consul['services'] = []
 
# consul['service_config'] = {
 
#  'postgresql' => {
 
#    'service' => {
 
#      'name' => "postgresql",
 
#      'address' => '',
 
#      'port' => 5432,
 
#      'checks' => [
 
#        {
 
#          'script' => "/var/opt/gitlab/consul/scripts/check_postgresql",
 
#          'interval' => "10s"
 
#        }
 
#      ]
 
#    }
 
#  }
 
# }
 
# consul['watchers'] = {
 
#  'postgresql' => {
 
#    enable: false,
 
#    handler: 'failover_pgbouncer'
 
#  }
 
# }
 
################################################################################
 
# Service desk email settings (EEP only)
 
################################################################################
 
### Service desk email
 
###! Allow users to create new service desk issues by sending an email to
 
###! service desk address.
 
###! Docs: https://docs.gitlab.com/ee/administration/reply_by_email.html
 
# gitlab_rails['service_desk_email_enabled'] = false
 
 
 
#### Service Desk Mailbox Settings (via `mail_room`)
 
#### Service Desk Email Address
 
####! The email address including the `%{key}` placeholder that will be replaced
 
####! to reference the item being replied to.
 
####! **The placeholder can be omitted but if present, it must appear in the
 
####!  "user" part of the address (before the `@`).**
 
# gitlab_rails['service_desk_email_address'] = "contact_project+%{key}@gmail.com"
 
 
 
#### Service Desk Email account username
 
####! **With third party providers, this is usually the full email address.**
 
####! **With self-hosted email servers, this is usually the user part of the
 
####!  email address.**
 
# gitlab_rails['service_desk_email_email'] = "[email protected]"
 
 
 
#### Service Desk Email account password
 
# gitlab_rails['service_desk_email_password'] = "[REDACTED]"
 
 
 
####! The mailbox where service desk mail will end up. Usually "inbox".
 
# gitlab_rails['service_desk_email_mailbox_name'] = "inbox"
 
####! The IDLE command timeout.
 
# gitlab_rails['service_desk_email_idle_timeout'] = 60
 
####! The file name for internal `mail_room` JSON logfile
 
# gitlab_rails['service_desk_email_log_file'] = "/var/log/gitlab/mailroom/mail_room_json.log"
 
 
 
#### Service Desk IMAP Settings
 
# gitlab_rails['service_desk_email_host'] = "imap.gmail.com"
 
# gitlab_rails['service_desk_email_port'] = 993
 
# gitlab_rails['service_desk_email_ssl'] = true
 
# gitlab_rails['service_desk_email_start_tls'] = false
 
 
 
</pre>
 
  
 
== Related terms ==
 
== Related terms ==

Revision as of 19:01, 26 August 2022

Advertising: