Difference between revisions of "Lead–acid battery"

From wikieduonline
Jump to navigation Jump to search
Tags: Mobile web edit, Mobile edit
Line 35: Line 35:
 
* Corrosion, shedding, electrical short, [[sulfation]], dry-out, acid stratification and surface charge
 
* Corrosion, shedding, electrical short, [[sulfation]], dry-out, acid stratification and surface charge
 
* Phases of a Lead-acid battery: formatting, peak and decline
 
* Phases of a Lead-acid battery: formatting, peak and decline
* [[CTEK]]
+
* [[CTEK]]: [[CS ONE]]
  
 
== See also ==
 
== See also ==

Revision as of 08:28, 16 October 2023

Wikipedia:Lead–acid battery (1859)


Charging

A typical 125-AH RV or Marine battery will take approximately 80 hours to recharge at 13.6 volts. Increasing the charge voltage to 14.4-volts will reduce battery recharge time for a 125-AH battery to 3-4 hours.

Charge efficiency varies between 80-99% depending on temperature and current.


A lead–acid battery's nominal voltage is 2 V for each cell. For a single cell, the voltage can range from 1.8 V loaded at full discharge, to 2.10 V in an open circuit at full charge.

Producers

Related

  • OCV Open Circuit Voltage
  • SoC
  • Corrosion, shedding, electrical short, sulfation, dry-out, acid stratification and surface charge
  • Phases of a Lead-acid battery: formatting, peak and decline
  • CTEK: CS ONE

See also

Advertising: